Products List 39
-
ISW Horizontal Pipeline monoblock Centrifugal Pump
ISW Series horizontal centrifugal pump Steady operation:Shaft and impeller is homocentric so that pump can operate steadily and without vibration.No leak:Hard alloy mechanical seal of different material for different liquidsSmall noise:Two bearings with little noise support the pump.Little troublesSingle structure and fluid parts with high quality prolong the life of pump.Convenient maintenanceIt is easy to replace the seal and bearing etc.Smaller occupancy of locationOutlet can be toward left and right and upon direction to plan pip...
Flow rate: 2-2000m3/h
Head: 3-125m
pump material: cast iron or stainless steel
centrifugal pump: oil pump
-
G,FG Series single screw pump /eccentric helical single screw pump
G Series eccentric helical single screw pump is for the displacement pump. The major working parts is from eccentric helical screw (rotor) and fixed bush (stator).The special shape of eccentric helical screw (rotor) and stator separately form the sealed cavities. The medium is evenly pushed in the axial direction and internal flow rate is low and volume remains unchanged to have the stable pressure. There is no eddy current and agitation.Every stage pump has the output pressure 0.6MPA (60m) when the clear water is tested. Suction height is 3m....
Flow rate: 2-300m3/h
Head: 3-120m
pump material: cast iron or stainless steel
food pump: screw pump
-
1-1B Slurry pump pulp pump underflow pump screw pump
Screw pump is a single-screw transfer pump. Its main working parts include the screw of eccentric helicoid(called rotor) and the screw bush with a double-line helicoid on its inner surface(called stator). Its working principle goes like this: when the electric motor drives the pump shaft t rotate, the screw rotates around its own axes on one hand and rolls along the inner surface of the bush on the other, thus forming a seal cavity in the pump. When the screw rotates a cycle, the liquids in the seal cavity will advance a screw pitch forward. With th...
Flow rate: 2-200m3/h
Head: 3-120m
pump material: cast iron or stainless steel
screw pump: slurry pump
-
DY Horizontal multistage centrifugal oil pump
DY series multistage centrifugal oil pump is used to transport the oil and oil products without solid grains. Oil temperature: -20 degree celsius～150 degree celsius. The oil viscosity is less than 120 centipoise. Performance Range:Q=6.3-450m3/h, Head=50-660m (Middle and low pressure) 409-1056 (high pressure) Shaft seal is flexible gland packing or mechanical seal. High pressure pump is normally with slip bearing of thin lubricate. Other pumps are roll bearing of dry lubricate. Middle and low&n...
Flow rate: 3-600m3/h
Head: 2-600m
pump material: cast iron case, explosion-proof motor
mechanical seal: multistage pump
-
YCB Series circle arc gear pump
YCB Series circle arc gear oil pump is suitable to transfer various lubricant oils and other liquids similar to lubricant oils without solid grain and fiber and oil viscosity is 5-1500CST. Pump material: cast iron/steel (For oils which temperatures are not higher than 80 degree celsius)and stainless steel (For oils which temperatures are not higher than 200 degree celsius and corrosive liquids and drinks and oils etc without lubricant. And stainless steel pump with bronze gears can be used for liquids with low flash point such as gasolen...
Flow rate: 2-100m3/h
Head: 3-250m
pump material: cast iron or stainless steel
oil pump: transfer pump
-
YG Vertical pipeline centrifugal oil pump
YG Series pipeline oil pump with explosion proof motorYG series pipeline oil pump is designed and manufactured according to API610 and GB3215-82 standard. It can be used outdoor without pump house.2.Inlet and outlet flange are on the same centric line and can be set directly into pipeline. Vertical structure let the pump small volume and convenient installation.3.Mechanical seal with high quality has no leakage.4.Pump is driven by explosion proof motor of explosion mark DIIBT4 to insure good explosion proof. YG Series ...
Flow rate: 2-1000m3/h
Head: 3-125m
pump material: cast iron case,bronze impeller, explosion-proof motor
mechanical seal: vertical pump
-
CYZ-A Self priming centrifugal oil pump
CYZ-A Series self priming centrifugal oil pumpCYZ-A self priming centrifugal oil pump has the advantages such as simple structure and convenient operation and steady running and large discharge capacity and high efficiency and low noise and long life etc. The pump has the strong self priming performance and suction pipeline need not install foot valve. It is widely used to transport gasoline,kerosene,diesel oil, oil for aviatin in oil warehouse,oil station,oil tanker,dock,tank truck,airdrome etc. It can also be used in chemical industry,pharm...
Flow rate: 3-500m3/h
Head: 2-80m
Pump material: cast iron case,bronze impeller, explosion-proof motor
mechanical seal: centrifugal horizontal pump
-
CZ Stainless steel chemical process centrifugal pump anticorrosion pump
CZ series standard chemical pump is a horizontal single-stage and single-suction centrifugal pump which conforms to such standards as DIN24256, ISO2858 and GB5662-85, which is a basic product among standard chemical pumps.It’s suitable to transfer media being low-temperature or high-temperature, neutral or corrosive, being clean or containing solid grains, or being poisonous, inflammable or explosive. It’s mainly applied in such industries as chemical engineering, petrochemicals, steel works, power plants, papermaking, pulp, medicine, food ...
Flow rate: 2-2400m3/h
Head: 3-125m
pump material: stainless steel, sus304,sus316,sus316L
rotary speed: 1400-3600rpm
-
FZB Series fluoroplastic self priming centrifugal pump
FZB,FZB-L Series fluoroplastic self priming centrifugal pumpFZB series fluoroplastic self-priming pumps are manufactured according to the international standard combined with the process design of non-metal pumps. Pump body is made of a metal case lining fluoride plastic and flow components are all made of fluoroplastic alloy. It means that pump cover, impeller, etc are made of metal lined with fluorine plastic .Shaft seal is for bellows mechanical seal fitted outside type and static ring is 99.9% alumina ceramic (or silicon nitride)and dyn...
Flow rate: 2-100m3/h
Head: 3-50m
pump material: Fluoroplastic
suction height: 4 meters
-
SZ Series fiberglass self priming chemical centrifugal pump
SZ type fiberglass reinforced plastics corrosion resistant self-priming pump.The flow components for SZ fiberglass self priming pump are made of the modified phenolic fiberglass reinforced plastic material by high temperature molding.The pump has the advantages such as light weight, high strength, no deformation, high temperature resistance, corrosion resistance and easy maintenance etc.Mechanical seal for the pump is WB2 fitted outside type F4 corrugated mechanical seal which is reliable and has a long service life.SZ type fiberglass self pr...
flow rate: 2-100m3/h
head: 2-35m
pump material: fiberglass plastic
suck height: 3m
-
WFB Series vertical self priming centrifugal pump
WFB Series no-seal-self-control-self priming pump adopts an interlink type multiple faced centrifugal sealing mechanism. There is no abrasion of sealing devices to avoid the problems of running, emitting, dropping, leaking etc. So the pump life is several times longer than that of similar products.The pump is featured with resistance to heat and resistance to pressure and resistance to abrasion and forever self-suction upon once flow induction etc. It has reliable self-suction performance especially because of using electric air control valve. I...
flow rate: 2-1800m3/h
head: 3-80m
pump material: stainless steel,cast iron,plastic
vertical pump: centrifugal pump
-
FPZ Self priming self priming polypropylene centrifugal pump
FPZ Series corrosion resistance self priming pump is the horizontal pump with self priming performance. It is made of reinforced polypropylene plastic (RPP) which is suitable for the liquids between -10℃ and 90℃ and PVDF which are suitable for the liquids between -10℃ and 120℃. Shaft seal is the corrosion resistance mechanical seal with no leak. Impeller and shaft are in-lined for the steady operation and so as not to let the liquids into shaft.Connection method for the pump and motor has two types. One is close couple which has compa...
flow rate: 2-100m3/h
head: 2-32m
pump material: polypropylene plastic
suck height: 3m
-
ZX Series self priming centrifugal clean water or chemical pump
ZX series pumps are newly developed self-priming centrifugal pumps for clean water or chemical liquids. The pumps have the advantages such as compact structure and high efficiency and energy-saving and reliable operation and long life and more strong self priming characteristic etc.Only keep some guidable liquids into the pump for self-priming before starting pump. It need not install foot valve in pipeline. So the pumps can simplify pipeline system and operating conditions. 1. Range: environment protection, construction, fire fight, ...
flow rate: 3-300m3/h
head: 2-80m
pump material: cast iron or stainless steel
lift height or suck height: 3-5meters
-
ZCQ Series self priming magnetic pump
ZCQ Series self priming type magnet pumpSummary:ZCQ Series self priming type magnet pump is the magnet pump with 4meter self priming height but it need not install foot valve and pour guide water. Rotary ring replaces stationary ring so that parts which contact with liquids are entirely sealed and no leak. Pump body and parts which contacts with liquids are stainless steel and ceramic and Teflon etc material to insure the good anticorrosion performance
Flow rate: 2-100m3/h
Head: 2-80m
pump material: stainless steel
magnetic coupled pump: electromagnetic pump
-
MP Series polypropylene plastic magnetic circulation pump
MP Series minitype magnet pumpMP Series minitype magnet pump is fully sealed without mechanical seal. The magnetism material in shaft and impeller attract each other for coincidence. Torsion of motor is driven by active magnet and passive magnet to let impeller work. Ceramic bearing has very good wearable and anticorrosion performance.The pump is widely used to transport acid and alkali and oil and rare liquids and toxin and volatile liquids in chemical industry, pharmacy,petroleum, electroplate,food, photo etc and water circulation system and ...
Flow rate: 5-360L/MIN
Head: 2-12m
pump material: polypropylene plastic
magnetic pump: circulation pump
-
CQB-G high temperature magnetic pump
CQB-G Series high temperature magnetic pump uses multiple circulating cooling structure to ensure the dependability and stability of prime mover and magnetic drive. Meanwhile,pin coupling is used to reduce the noise and vibration of pump. The detachable type and pin coupling makes the structure of pump longer,which is good for heat dissipation. Moreover, to make repair and replacement of spare parts much easier, a heat dissipation fan blade is designed on the outer rotor of pump to ensure the stability of magnet steel. This series of...
Flow rate: 3-100m3/h
Head: 2-80m
pump material: stainless steel
no leakage pump: high temperature pump
-
CQB Stainless steel magnetic coupled pump
The wet parts of this pump are made of full stainless steel material to perform outstanding corrosion resistance to organicacid,organic compound,alkali,neutral solution and a great many of gases. double helix carbon graphite bearing and hard alloy bearing are provided with good abrasion-resisting property to ensure the service life of product.It is an optimal pump for handling corrosive mediums without leakage. Material of wet parts:stainless steelConnecting types: flange and pipeFlow:1.9-120m3/hHead:20-80mPower:0.75-75KWKine...
Flow rate: 2-100m3/h
Head: 3-80m
pump material: stainless steel
no leakage pump: magnetic pump
-
CQ Stainless steel magnetic pump
CQ Series magnet pump is the new centrifugal pump used with magnetic coupling. The material of magnet pump has the stainless steel and reinforced polypropylene and engineering plastic etc. The pump has the advantages of reasonable design and entire seal and no leak and anticorrosion characteristic. The rotary seal replaces the stationary seal to insure no leak because the parts which contact with liquids are entirely sealed. Magnet pump is made of engineering plastic with anticorrosion and high strength and ceramic and stainless steel to ins...
Flow rate: 2-100m3/h
Head: 3-50m
pump material: stainless steel
magnetic coupled pump: no leakage
-
YW Series submersible sewage pump
1.YW non-clogging vertical sewage pump waste water submerged pump is used to drain dirty water, waste water, rainwater, and living water in cities containing solid grains and various long fabrics.2. It has two models of single pipe and double pipes. Pipes below the fixed plate may be submersible, at least the pump casing at the bottom should be submerged in water.3. The impeller adopts particular large channel structure, so the drain capacity has been improved greatly.4. The sewage submerged pump is mainly used for municipal works, industrial build...
Flow rate: 2-600m3/h
Head: 3-60m
pump material: cast iron or stainless steel
submersible pump: sewage pump
-
AS,AV Submersible sewage pump with tearing device
AS Series not-clogging submersible sewage pump with tearing deviceSummary:AS Series submersible sewage pump is very suitable to transport the liquids with solid grain and fiber and dirty and viscous liquids. All the AS series pump are assembed with tearing device. They can shred the long fiber and bag and strop etc in sewage and discharge them to insure the pumps are not clogging and operation is steady.1. Good performance in sewage discharge2. Tearing device can shred and cut long fiber and discharge them and the pumps need ...
Flow rate: 2-100m3/h
Head: 2-35m
pump material: cast iron or stainless steel
impeller type: tearing device to tear the fiber or strip