Products List 31
-
GW Vertical pipeline sewage pump
GW Vertical pipeline sewage pumpGW series pipeline non clogging sewage pump is suitable for the dirty water containing particles, dirt and the pump can also be used for water and weak corrosive medium. GW pipeline sewage pump is mainly used in the factory business seriously polluted wastewater emissions, residential sewage station, urban sewage treatment plant water system, civil air defense system drainage stand, waterworks water supply equipment, hospital, hotel of sewage, municipal engineering, construction, mining machine, rural biogas digeste...
Flow rate: 2-1500m3/h
Head: 3-80m
pump material: cast iron or stainless steel
centrifugal pump: sewage pump
-
FSB Fluorine plastic FEP chemical transfer pump
FSB Series fluoroplastic alloy chemical centrifugal pump has two connections between the pump and motor(FSB-L and FSB-D). FSB-L is for shaft couple connection between the pump and motor and FSB-D is for closed couple between the pump and motor. Pump casings and impellers and mechanical seals for two connection can be exchanged in applicationFSB pumps flow parts which contacts liquids are made of fluoroplastic(F46) and so they have the advantages such as excellent corrosion resistance, high mechanical strength, no agin...
Flow rate: 2-100m3/h
Head: 3-80m
pump material: Fluorine plastic FEP/F46
centrifugal pump: chemical pump
-
ZW,ZWL Self priming sewage trash pump
Self priming sewage pump has the suction height up 5 meter. The pump can be made of cast iron or stainless steel. The pump between the motor is connected by shaft coupling or direction connection.Lower cost, high efficiencyThe pump is used to transfer to wastewater or waste liquids with solid grain or fiber etc impurity.ZW series self-priming sewage pumps are with self priming and sewage discharge. It means the pumps can not only be self priming as the same as ZX series self priming pump for clean water without foot valve and pouring water but ...
Flow rate: 2-600m3/h
Head: 3-80m
pump material: cast iron or stainless steel
centrifugal pump: self priming pump
-
LPG side channel Multistage centrifugal pump
LPGP-65 LPG multistage pump is a centrifugal side channel pump with a horizontal structure, a total of 6 stages, the shaft is mechanically sealed, no cooling. LPGP-65 multistage pump is used to transfer LPG, especially for liquids with high pressure difference, low cavitation NPSH and gas content up to 50 percent, such as LPG pumped from underground tanks. The pump USES a pre-compressed turbine at the suction end, which makes it suitable for use in the case of low cavitation NPSH allowance. positive suction heads is lower th...
Flow rate: 0-40m3/h
Head: 400m
pump material: cast iron or stainless steel
centrifugal pump: multistage pump
-
RCB insulation gear oil pump
RCB insulation oil pump structure features:RCB heat preservation pump is equipped with hollow interlayer and inlet and outlet flange. Heat conduction of oil, steam, hot water and other media is used for heat preservation and cooling of the pump. The pump can be driven by electric motor or speed reducer (when liquid viscosity is more than 1500C.S.T)RCB insulation oil pumpRCB insulation oil pump can be divided into cast iron and cast steel material with thermal insulation jacket. Heat pump is applicable to pump the fluids solidified...
Flow rate: 2-60m3/h
Pressure: 0.28-0.6MPA
Pump material: cast iron or stainless steel
Gear pump: OIL PUMP
-
WG,WD horizontal sewage pump
WG, WGF, WD, WDF sewage pump is a new series sewage pump developed by our company according to the standard of JB2975-81 centrifugal sewage pump. This series of pumps is advanced in design, compact in structure, high in efficiency, easy to use and maintain.WG, WD series pumps are suitable for pumping sewage, excrement and liquid containing fiber or suspended matter below 80DegreeCelsius (the fast size of suspended matter group is not more than 80 percent of the discharge diameter).WGF, WDF pump parts are made of stainless steel, ...
Flow rate: 3-200m3/h
Head: 10-50m
pump material: cast iron or stainless steel
centrifugal pump: transfer pump
-
WB,WBR electric reciprocating pump
WB type electric reciprocating pumpFlow parts of WB type electric reciprocating pump are divided into two materials, cast iron and stainless steel materials . Cast iron reciprocating pump is used for pumping water or oil products and other non-corrosive liquids. Stainless steel pump is made of 1Cr18Ni9Ti steel and Suitable for pumping all kinds of acid and alkali liquid.WB reciprocating pump is especially suitable for unloading tank truck. And other occasions requiring self-absorption. WB electric reciprocating pump can transfer the liqui...
Flow rate: 0.5-30m3/h
Head: 0.3-12MPA
pump material: cast iron or stainless steel
Piston pump: plunger pump
-
QXN Submersible centrifugal water pump
QXN built - in series engineering submersible pump Our company has a strong technical development capacity and experience in the submersible pumps . QXN Submersible pump is designed and produced with a novel suction and drainage structure. The pump is composed of dry vertical motor and pump coaxial direct connection and adopt a number of modern advanced technology.This electric pump is compared with other electric pumps and has self-cooling mode. When the electric pump is pumping, the motor can run continuously for a long time. It can di...
Flow rate: 6-40M3/H
Head: 20-150M
pump material: cast iron
centrifugal pump: submerged pump
-
SP Submerged slurry pump corrosion resistant and wearing resistant centrifugal pump
SP submerged slurry pump is for vertical centrifugal slurry pump and submerged in liquid and used to transport abrasive, rough particles, high concentration slurry. The pump does not need any shaft seal and shaft seal water and can work normally under insufficient suction.The flow parts of SP submerged slurry pump is made of wear - resistant metal.SPR submerged slurry pump has the submerged parts with rubber lining and SPR Submerged slurry pump is suitable for conveying non-angular abrasive slurry.According to the slurry pool level, you can...
Flow rate: 7-1300m3/h
Head: 5-36m
pump material: high chrome alloy
centrifugal pump: slurry pump
-
DL Vertical multistage booster water pump 1480rpm
DL vertical multistage centrifugal pump is used for conveying liquids with no hard particles and other similar liquids to water in physical and chemical properties .DL type vertical multistage centrifugal pump adopts domestic excellent high efficiency and energy saving hydraulic model, with high efficiency, steady performance curve, wide operating range, in line with the relevant regulations of the fire department, to meet the needs of different users.DL vertical multistage centrifugal pump adopts vertical segmental structure, which has the advanta...
Flow rate: 4-500m3/h
Head: 10-300m
pump material: CAST IRON
centrifugal pump: transfer pump
-
DY Stainless steel chemical transfer centrifugal pump
DY series electrophoresis pumps are horizontal single-stage single-suction centrifugal pumps developed by relevant scientific research departments and experts according to the production process characteristics of coating industry. This kind of electrophoresis pump is mainly suitable for conveying corrosive medium containing particles, high viscosity, strong permeability and easy to crystallize. It is an ideal special equipment used in coating industry and completely solves the disadvantages of general centrifugal pump such as easy damage to seal, po...
Flow rate: 2-400m3/h
Head: 3-125m
pump material: stainless steel, sus304,sus316,sus316L
centrifugal pump: transfer pump
-
DP mini DC diaphragm pump
DP mini diaphragm pump1. Low noise, corrosion resistance to weak acid and alkali, oil resistance, high pressure, self-suction height 5m.2. Medium temperature can reach 60 degree celsius3. Allow dry operation.4. Pressure switch is installed to protect the pump from damage during operation.5. Overflow valve is installed to control the normal operation of the pump.6. Easy to disassemble and assemble.7. Safe low voltage is adopted to ensure personal safety.DP mini diaphragm pump application1. DP Mini diaphragm pump is suitable for household tap...
Flow rate: 1-10LPM
Pressure: 0.2-0.9MPA
pump material: polypropylene plastic
diaphragm pump: membrane pump
-
WB,WBS Stainless steel centrifugal pump
WB,WBS stainless steel small centrifugal pumpWB Stainless steel mini-type centrifugal pumpWB Series stainless steel micro centrifugal pump is for corrosion resistant centrifugal pump with semi-open impeller and pump body is made of stainless steel.WB,WBS Stainless steel centrifugal pump has the features of corrosion resistance ,reliable and convenient operation and maintenance, compact structure, low energy consumption, good sealing performance etc.WB,WBS stainless steel small centrifugal pump can transport the corrosive or sa...
Flow rate: 4-25M3/H
Head: 10-32M
pump material: stainless steel
impeller type: Semi-open
-
UHB-ZK corrosion resistant slurry pump
UHB-ZK series anticorrosive and wear-resisting pump belongs to single-stage single-suction cantilever type centrifugal pump. The flow parts are made of steel lined with Ultra-high molecular weight polyethylene (UHMWPE) .UHMWPE material is a new corrosion resistant and wear-resistant engineering plastics in the world. Its most outstanding advantage is that it has excellent abrasion resistance and impact resistance (especially low temperature impact resistance) among all plastics. No deformation ,no cracking and excellent corrosion res...
Flow rate: 5-2600m3/h
Pressure: 5-80m
pump material: steel lined with UHMWPE
centrifugal pump: chemical pump
-
JETB Stainless steel self priming injector centrifugal pump
JETB series stainless steel injector self priming centrifugal pump is self-priming portable injector centrifugal pump and its flow components are made of stainless steel and high-strength composite plastics. The pump has the features of small volume, light weight, beautiful appearance, smooth running, high efficiency, smooth operation and easy installation etc.Injector pump application rangeSuitable for conveying thin, clean liquids without solid particles and fibers, weak acid and other liquids ( no crystallization, performance close to water liq...
Flow rate: 1-3m3/h
Head: 10-25m
pump material: stainless steel
centrifugal pump: transfer pump
-
NYP High viscosity fluids transfer pump rotor pump
NYP high viscosity rotor pump :NYP high viscosity pump, high viscosity rotor pump application rangeMedium temperature: -10 to 150degree CelsiusMedium viscosity: 1.0 CST to 6 000000 CSThigh viscosity pump application:High viscosity pump is suitable for petroleum, chemical, coating, grease, medicine, dye, food and other industries.NYP high viscosity rotor pump is used to convey organic acids, fatty acids, alkaline, caustic salts, sodas, polymers, soaps, shampoos, animal fats, vegetable oils, chocolates, and other specialty fluids.high vi...
Flow rate: 0-200m3/h
Head: 100m
pump material: cast iron or stainless steel
rotor pump: transfer pump
-
CB Centrifugal water pump irrigation pump
CB series centrifugal pump is composed of impeller, pump body bearing body, seal and other components and with inlet and outlet components. It is produced in strict accordance with JB/T 6663.1-93 and JB/T 6663.1-93 standards.CB Centrifugal pump has the advantages of small size, light weight, compact structure, excellent and reliable performance and convenient operation and maintenance and movement.ApplicationCB series centrifugal pumps are widely used in irrigation and drainage of farmland, sprinkling irrigation, landscaper sprinkling irri...
Flow rate: 2-200m3/h
Head: 5-60m
pump material: cast iron or stainless steel
centrifugal pump: transfer pump
-
RXB Flexible impeller self priming rotor pump
RXB flexible impeller pump features:1. Strong self-absorption, perfect structure principle, 6-meter dry self-absorption, up to 9-meter with fluids2. Short self-priming time, instantaneous self-priming within 6 meters, completed in 2-3 seconds.3, simple structure, convenient maintenance, no need for professional guidance, maintenance does not need to remove the pump pipe.4, less wearing parts5. Small volume and small space for field equipment.6. High efficiency for large flow, minimum and most energy-saving power under the same flow.7. No noise du...
Flow rate: 50-300L/M
Head: 30M
pump material: stainless steel
centrifugal pump: self priming pump
-
TD inline single stage pipeline centrifugal transfer pump
TD vertical pipeline centrifugal pump is the upgrade vertical single-stage pipeline centrifugal pump. The pump is equipped with standard motor and mechanical seal. Compared with the previous generation of products, this pump has a wider operating curve, higher efficiency and less susceptible to impurities in the liquid.TD Vertical pipeline centrifugal pumps are designed as pipeline structure which can be pulled out at the top. The pumps adopt innovative detachable mechanical seals, replacing mechanical seals without removing motors.F...
Flow rate: 4-1200m3/h
Head: 4-110m
pump material: cast iron or stainless steel
centrifugal pump: transfer pump
-
ZJQ Submersible slurry not clogging pump
ZJQ Submersible slurry pump with agitatorZJQ Series submersible slurry pump is a kind of hydraulic mechanism which motor connects directly with pump. Pump body is the advanced structure of below suction type with stirrer and made from high-chrome alloy material and convenient to remove and install. So the pump is not clogging,corrosion-resistance,wear-resistance etc. The pumps are centrifugal, vertical slurry pumps submerged in sump during operation. They are designed for delivering highly abrasive, large particles and high ...
Flow rate: 20-750m3/h
Head: 10-60m
pump material: high chrome alloy
centrifugal pump: sewage pump