Products List 33
-
CHLF(T)horizontal multistage centrifugal water pump
CHLT horizontal multistage centrifugal pump is a multi-function pump. CHLT horizontal multistage centrifugal pump can transport tap water and other various similar liquids in industries. All flow parts are made according to national standard casting. The use for the pump is very safe and reliable. Multiple stainless steel impellers make the pump have greater discharge pressure.Pumps application scope:Domestic Water transportation and booster in water, villa, apartment and hotel, solar energy, water heater, pressurized water, bea...
Flow rate: 2-32m3/h
Head: 8-45m
pump material: stainless steel impeller and cast iron inlet and outlet
centrifugal pump: transfer pump
-
KCBC Magnetic coupling gear oil pump
KCBC magnetic gear pump is suitable to convey various lubricant oil with viscosity (5 to 1500CST) and oil temperature is below 260 degree Celsius.Stainless steel gear pump can convey the beverage and low corrosive liquids( non lubricating oil ). Bronze gear pump can transport flammable, explosive and other similar liquids with low ignition point such as gasoline, benzene etc.The pump can be driven by explosion proof motor or non explosion-proof motor. KCBC magnetic gear pump has no leakage and is used in transmission and booster of oil tra...
Flow rate: 1-570m3/h
Head: 0.1-1.45MPA
pump material: cast iron or stainless steel
Gear pump: magnetic pump
-
IHR stainless steel chemical centrifugal pump with heat preservation jacket
IHR explosion proof corrosion resistant heat preservation pump is the single stage single suction cantilever centrifugal pump. IR pump is developed at IHR chemical centrifugal .IHR explosion proof corrosion resistant heat preservation pump is suitable to transfer high temperature corrosive chemical fluids with high freezing point (or the temperature of crystallization point is high) in chemical industry, chemical fiber, petroleum, food, pharmaceutical and other industries. Features:Explosion proof ,corrosion resistance, heat preservatio...
Flow rate: 3-460m3/h
Head: 3-132m
pump material: stainless steel
centrifugal pump: chemical pump
-
FYS Fluorine plastic submerged chemical pump
FYS Corrosion resistant submerged pump is the developed single stage single suction long shaft submerged pump with vertical structure. The flow parts for FYS corrosion resistant submerged pump is made of fluorine plastic alloy and the lower protection sleeve is made of silicon carbide with high quality.FYS corrosion resistant submerged pump is suitable to transport corrosive liquids without solid particles and the temperature of liquids is at 0 to 120 degree Celsius.FYS corrosion resistant submersible pump has the good corrosion resistance...
Flow rate: 2-460m3/h
Head: 3-60m
pump material: fluorine plastic alloy
centrifugal pump: chemical pump
-
FBZ Corrosion resistant self priming chemical pump
FBZ corrosion resistant self priming chemical pumpFBZ series corrosion resistant self priming chemical pump can be made of stainless steel such as SS304,SS316,SS316L etc material. Connection type between the pump and motor can be with closed coupling or shaft couple.FBZ Corrosion resistant self priming chemical pump is suitable to transfer the corrosion liquids (or with small soft particle or fiber) or food liquids. The pump with closed coupling is suitable for the fluids whose temperature is not higher than 90 degree. The pump ...
Flow rate: 2-25m3/h
Head: 3-28m
pump material: stainless steel, sus304,sus316,sus316L
motor: 380V,3Phase/220V,Single phase
-
ZMD-F Fluorine plastic magnetic self priming pump
ZMD-F Fluorine plastic self priming magnetic pump adopts the structure of external mixed type axial return pump body which is composed of liquid suction chamber, liquid storage chamber, volute case, backflow hole, gas-liquid separation chamber and other parts. When pump starts, under the action of centrifugal force, the remaining liquid in the suction chamber and the air in the pipeline is stirred by impeller into air water mixture and then the mixture enters into the gas-liquid separation chamber through the volute. As the speed is slower, gas an...
Flow rate: 2-65m3/h
Head: 3-50m
pump material: Fluoroplastic liner
centrifugal pump: magnetic pump
-
FYB Stainless steel vertical submerged pump
Performance rangeFlow rate: 1.6 to 2600m3/hHead: 5 to 132mSpeed: 1450 to 2900r/minPump introduction:FY type vertical submerged pump is a single stage single suction centrifugal submerged pump. The pump rated performance point and flange connection size equivalent to ISO2858 international standard. FY Vertical submerged pump is with small volume, high efficiency, good energy saving effect, reliable operation and other advantages. FY Vertical submerged pump is Suitable to convey corrosive medium without solid particles or abrasive impurit...
Flow rate: 2-1500m3/h
Head: 3-125m
pump material: stainless steel, sus304,sus316,sus316L
centrifugal pump: chemical pump
-
ZW Self priming sewage pump with trailer
ZW Self priming sewage pump has the self priming and sewage discharge performance. The pump can be made of cast iron or stainless steel and driven by common motor or explosion proof motor. ZW Self priming sewage pump is used to transfer wastewater or waste liquid with solid particles or fiber etc impurity. ZW Self priming sewage pump with trailer is convenient to move . ZW Series self priming sewage pump can made of cast iron or stainless steel and used to transfer the wastewater with particles or waste liquid with solid or fiber etc impurit...
Flow rate: 2-600m3/h
Head: 3-80m
pump material: cast iron or stainless steel
centrifugal pump: sewage pump
-
LW,WL Vertical wastewater pump effluent pump
LW Vertical not-clogging sewage pump is used to transfer the waste water with fiber diameter 5 times as pump diameter or the solid particles diameter 50% as the pump diameter. LW vertical not-clogging sewage pump adopts a unique single (double) channel impeller and improves the sewage discharge for the not-clogging.LW sewage pump has two structural forms. One is the motor and pump directly connected coaxial and the other is the use of coupling connection. The motor adopts a standard vertical motor. Its structure diagram is as follows. Each str...
Flow rate: 5-3600m3/h
Head: 5-60m
pump material: cast iron or stainless steel
vertical pump: inline pipeline pump
-
FS Series fiberglass reinforced plastic corrosive resistant centrifugal pump
FS Series fiberglass reinforced plastic corrosive resistant centrifugal pumpThe flow parts for S Series FRP centrifugal pump are made of modified phenolic fiberglass material by high temperature molding.FS Series FRP centrifugal pump has the advantages such as light weight, high strength, no deformation, high temperature resistance, corrosion resistance, easy maintenance and other excellent performance.Pump shaft seal uses WB2 fitted outside type F4 corrugated mechanical seal. The seal is reliable and has long service life.FS Serie...
Flow rate: 2-100m3/h
Head: 3-50m
pump material: fiberglass reinforced plastic
centrifugal pump: chemical pump
-
CQYB Magnetic vortex pump
CQYB magnetic gas liquid mixing pump is a horizontal self priming gas liquid mixing pump. The pumps are made of stainless steel materialGas liquid mixing pump inlet can use negative pressure to suck gas without gas compressor and atmospheric injector. The high speed rotating impeller stirs the liquid and gas thoroughly without the agitator and mixer. Through the pressurized mixing in the pump chamber, the gas and liquid are fully dissolved and the dissolution efficiency can reach 80 to 99.9%. Highly soluble liquids can be produced without large ...
Flow rate: 3-50m3/h
Head: 2-175
pump material: stainless steel
magnetic coupled pump: vortex pump
-
QYB gas liquid mixing vortex pump
Pump introduction:QYB type gas liquid mixing pump (also known as air float pump, dissolved air pump) is a horizontal installation of self priming gas liquid mixing pump. All parts of the QYB pump are made of stainless steel.Gas liquid mixing pump inlet can use negative pressure to suck gas without the use of gas compressor and atmospheric injector. The high speed rotating impeller stirs the liquid and gas thoroughly without the need for agitator and mixer. Through the pressurized mixing in the pump chamber, the gas and liquid are fully dissolv...
Flow rate: 3-50m3/h
Head: 10-150m
Pump material: stainless steel
centrifugal pump: vortex pump
-
VSP Series enhanced vacuum self priming pump
VSP Series enhanced vacuum self priming pumpVSP enhanced vacuum self priming pump is composed of pump body, pump cover, rotor assembly and power component. The rotor assembly is installed in the pump chambers between pump body and pump cover. The power component drives the rotor assembly to rotate and the rotor assembly rotates in the pump chamber to produce the changed of sealed chamber volume and rapidly generate the vacuum degree of in order to suck the fluids.The pump can be made of stainless steel (SS304,SS316) or hastalloy or engineer...
Flow rate: 2-70m3/h
Head: 2-38m
pump material: stainless steel, PP,PTFE
self priming pump: transfer pump
-
ZS,ZSW Self priming sewage centrifugal pump with vacuum suction device
ZS Self priming centrifugal pump with vacuum suction device.ZS Self priming sewage pump with vacuum suction diviceThe self priming pump can be driven by motor or diesel engineSelf priming centrifugal pump with vacuum suction deviceThe self priming pump need to be filled with water. The vacuum suction device can help the self priming pump to enhance the suction and can start and stop suction automatically. When the inlet pipeline or self priming pump is into low vacuum degree, the vacuum suction device starts automatically. When inlet pi...
Flow rate: 80-2200m3/h
Head: 10-80m
Pump material: cast iron or stainless steel
centrifugal pump: self priming pump
-
QZ Pneumatic high pressure piston/plunger pump high pressure pump
Pneumatic high pressure piston/plunger pumpIntroduction:The surface of stainless steel for the pump is polished and treated tightly which does not damage chemical properties of the material and can increase the speed of transportation.The pump can handle many kinds of high viscosity fluids and strong corrosive liquids.There are fewer maintenance parts to reduce the maintenance cost.Pneumatic pump provides high mechanical life Model:QZ10:1 Pressure ratio:10:1 Maximum flow:11.4LPM Air motor diameter:6” (152.4mm...
Flow rate: 11.4LPM
Pressure: 60BAR
pump material: SS304, SS316
Pneumatic pump: air pump
-
CY Series magnetic submerged pump no leakage anticorrosion
CY Series magnetic submerged pump no leakage anticorrosionYC Series magnetic submerged pumpYC Series magnetic submersible pump is suitable to pump the volatile, flammable, explosive, toxic, harmful and other similar fluids in petroleum, chemical, coal chemical, alkali making, smelting, rare earth, pesticides, dyes, medicine, scientific research institutions, national defense industry etc.Flow range:1.8-400m3/h,Head:15-125mWorking Temperature: -20 to 350 degree Celsius.YC Series no leakage magnetic drive pump is submerged pump to prevent ...
Flow rate: 1-400m3/h
Head: 2-125m
pump material: stainless steel
magnetic pump: submerged pump
-
HCLF Vertical fluorine plastic lining magnetic pump inline pump
HCLF vertical Fluorine plastic lining magnetic pump has the features of pipeline pump and magnetic pump. The flow parts are fluorine plastic (PTFE,PFA,FEP). The pump has the advantages of no leakage, good corrosion resistance and small volume, high efficiency etc.HCLF Vertical fluorine plastic lining magnetic pump is suitable to transfer flammable, explosive, volatile, toxic, high temperature alkali, organic fluxing agent and corrosive liquids in petroleum, chemical industry, alkali product, smelting, rare earth,pesticides,dyes,medi...
Flow rate: 2-100m3/h
Head: 3-125m
pump material: stainless steel lined with fluorine plastic
centrifugal pump: chemical pump
-
YLB Series press filter slurry centrifugal pump
YLB Press filter slurry centrifugal pump is used to transfer various corrosive slurry or pulp with particles or suspensions at the temperature from 10 to 120 degree Celsius. YLB slurry or pulp centrifugal pump is the good equipment used together with press filter equipment.YLB Slurry centrifugal pump for press filter equipment is widely used in petrochemical industry, rare earth smelting and press filter pulp liquid,pharmaceuticals,pesticides,dyes,paint,papermaking,electroplating,electricity,food and other industries.Flow rate:12.5 to 400m3/...
Flow rate: 2-400m3/h
Head: 3-120m
pump material: cast iron lined with PTFE
centrifugal pump: chemical pump
-
PWDDFL Vertical multiple suction sewage pump for wastewater
PWDDFL multi-suction sewage pump adopts single (double)flow channel and single (double)blades structure for not clogging and no leakage. The pump has compact structure, small volume, smooth operation and little vibration , high efficiency and easy installation and operation. PWDDF multi-suction sewage pump is widely used to transfer the wastewater or waste liquids with solid particles.Features:1. Multiple suction heads: each pump has 4 suction heads which are distributed in the center and corner of pump.2...
Flow rate: 2-100m3/h
Head: 3-45m
pump material: cast iron,cast steel or stainless steel
centrifugal pump: sewage pump
-
CGF Fluorine plastic lining high temperature magnetic pump no leakage pump
CGF no leakage fluorine plastic lining high temperature magnetic pump adopts magnetic principles. When the motor drives the outer magnetic cylinder to rotor, the inner magnetic cylinder assembly is affected by magnetic force and rotates with impeller to discharge the fluids.The flow parts for CGF fluorine plastic lining magnetic pump is fluorine plastic( PTFE、FEP、PFA). The pump body is made of cast iron with fluorine plastic liner. CGF Fluorine plastic lining magnetic pump is used to transfer strong acid, alkali, oxidant and corr...
Flow rate: 1-400m3/h
Head: 3-80m
pump material: cast iron lined with PTFE
centrifugal pump: chemical pump