Products List 35
-
QG,QGD Submersible screw pump
QG,QGD Submersible screw pump consists of three parts (pump group, seal and motor). Pump group is located in the upper parts of the electric pump. The main parts for pump group is screw and rubber stator. The motor is located in the lower part of the electric pump. The motor can be single phase or three phase asynchronous motor. The mechanical seal and O static oil resistant rubber sealing ring is fixed between the pump and motor.QG,QGD Submersible screw pump has high head with high efficiency. The pump is widely used in the long dista...
Flow rate: 1-5m3/h
Head: 5-100m
pump material: stainless steel
screw pump: transfer pump
-
FG Stainless steel screw pump sanitary pump
Screw pump is a positive displacement pump. The main working parts is for stator and rotor. Rotor is the screw which has a big lead and big depth and small thread diameter. Stator is the elasticity bushing with a double spiral. Rotor and stator consists of the seal chamber. When the rotor turns in the stator, sealed cavity moves along the axial direction from the pump suction side to discharge end, the medium inside the cavity continuously moves from the suction to the discharge end.Stainless steel screw pump is made of stainless steel material an...
Flow rate: 2-200m3/h
Head: 0.6-2.4MPA
pump material: stainless steel
Screw pump: stainless steel pump
-
KYB Self priming vane pump
KYB Self priming vane oil pump is used to pump various light oil, kerosene and other lubricant oils with kinematics viscosity less than 200 cs. The pump is widely used in loading, pumping and sweeping of oil depot, station, filling station, motorcade.Stainless steel vane pump can also transport beverages and any concentration of acid, lye, oxidant and other corrosive medium .Cast iron vane pump can also transport water quality materials as mobile fire pump.Feature:For diesel oil, kerosene, gasoline, benzene and other clean, light oily liqu...
Flow rate: 7-35m3/h
Head: 20-30m
pump material: cast iron, stainless steel,aluminum alloy
vane pump: self priming pump
-
IRG Vertical pipeline hot water centrifugal circulation pump
IRG Series single stage single suction centrifugal pump is for vertical structure and has the same performance parameters as IR heat water pump. The pump has the advantages such as high efficiency, low noise and reliable performance, small volume and economic cost etc.IRG Vertical hot water circulating pump is used for boiler high temperature hot water pressurization, circulation and urban heating system circulation in energy, chemical industry, textile, paper making and hotels etc. Liquid temperature is not higher than 120 degree Cels...
Flow rate: 2-1500m3/h
Head: 3-125m
pump material: cast iron or stainless steel
centrifugal pump: inline pump
-
HTB chemical industry centrifugal pump
Wear resisting ceramic centrifugal pump and ceramic slurry pump are single suction single stage centrifugal pump. The pump body and pump cover are made of low acid ceramics with excellent corrosion resistance and wear resistance. The impeller is mainly made of engineering plastics or engineering ceramics according to the users. Shaft seal is for dynamic seal or mechanical seal. The pump has the advantages such as corrosion resistance, wear resistance, high temperature resistance, convenient and reliable use.The pump is suitable to convey vari...
Flow rate: 5-400m3/h
Head: 3-50m
pump material: metal lined with ceramic
centrifugal pump: chemical pump
-
LWB,WLB Vertical explosion-proof sewage pump
LWB,WLB Vertical explosion-proof sewage pump is suitable to pump the wastewater as the drainage water pump and irrigation pump. The pump consists of shaft, bearing bracket, impeller, pump seat, motor frame and motor etc. The impeller is for single flow channel or double flow channel and can pass the fluids with fiber diameter 5 times as pump caliber or solid particles diameter 50% as pump caliber. Mechanical seal material is hard alloy. Pump material can be cast iron or stainless steel. LWB,WLB is used to transfer the dirty water with so...
Flow rate: 2-1500m3/h
Head: 3-45m
Pump material: cast iron or stainless steel
motor: common motor or explosion-proof motor
-
YHS Manual diaphragm pump with hand wheel
Working principle for manual diaphragm pump:Manual diaphragm pump is a non leakage pump, through the manual turbine or hand wheel to promote the synchronous reciprocating movement of the double diaphragm, diaphragm deformation caused by the volume change, and through the import and export one-way valve alternately open and close, in the liquid cavity to form a fluid suction, pressure alternation, so that the liquid will continue to suction and discharge. The pump works with excellent pressure flow automatic regulation characteristics, in the working p...
Flow rate: 0-20m3/h
Head: 0-30m
pump material: cast iron, aluminum alloy ,stainless steel
diaphragm pump: self priming pump
-
JX Plunger metering pump dosing pump chemical pump
JX Plunger metering pump characteristicMaximum flow rate:0-200L/HMaximum discharge pressure:0-50MPAMedium temperature is not higher than 250 degree CelsiusPump material:SS304,SS316L,20# alloy, Hastelloy, Ceramics etcFlow control mode: manual/automatic stroke adjustment/ digital frequency conversion controlPump can be adjusted in the running or stoppingSingle cylinder pump, double cylinder pump and three cylinder pump can be made. Flow can be independently adjusted.Flow stability viscosity: ±1%Inlet and outlet connection: pipe c...
Flow rate: 0-200LPH
Pressure: 0-50MPA
pump material: SS304,SS316L,20# alloy, Hastelloy, Ceramics etc
metering pump: dosing pump
-
T/P Super Self priming sewage pump
T/P Series super industrial self priming sewage pump is used to transfer the wastewater/trash with big solid particle or fiber etc impurity. The solid particles diameter can be up 76.2mm.The pump can be made of cast iron or stainless steel.Advantages:T /P Series Super industrial self priming wastewater pumpDuctile iron impeller is more wear resistant (T Series)Two vanes type open impeller has the better sewage discharge performance. The allowed particles diameter is up 76.2mm.Pump shaft :40CR wear resisting steel has the longer li...
Flow rate: 10-700m3/h
Head: 5-35m
pump material: cast iron or stainless steel
centrifugal pump: self priming pump
-
LC Long shaft submerged multistage centrifugal pump
LC Vertical long shaft submerged pump is developed and improved on the base of common submerged pump. LC Vertical long shaft submerged pump is used to transfer the clear water, rainwater, iron oxide water, sewage, corrosive liquids such as industrial wastewater and sea water etc below the temperature of 55 degree Celsius. When the pump is with special design, it can transfer the liquid with temperature up to 90 degree Celsius.LC Vertical long shaft submerged pump is widely used in water supply companies,sewage treatment plants, power plants, ...
Flow rate: 50-8400m3/h
Head: 15-150m
pump material: cast iron or stainless steel
centrifugal pump: multistage pump
-
RGB Peristaltic pump industrial hose pump
RGB hose pump or peristaltic pump:RGB Industries hose pump is called as peristaltic pump. The peristaltic pump is suitable to handle various fluids with impurity, high viscosity, high density fluids and the fluids with equal liquid and solid. RGB peristaltic pump without mechanical seal and can reverse. The pump has strong self suction ability (maximum suction height:8m) and self cleaning characteristics with simple structure and easy maintenance ,no leakage and no pollution etc. The pumped fluids containing impurity is only contacted w...
Flow rate: 2-100m3/h
Head: 60m
slurry pump: pulp pump
sewage pump: chemical pump
-
FBK chemical resistant centrifugal pump with semi open impeller
AFB centrifugal pump is a kind of single stage single suction cantilever corrosion resistant centrifugal pump which is improved on the basis of F type corrosion resistant pump. The pump is made of 1Cr18Ni9Ti, 304, 316L etc materials. FB, AFB centrifugal pump is used for conveying corrosive liquid without solid particles or a small amount of impurities. The liquid temperature is -20 to 130 degree Celsius and the inlet pressure is not more than 0.2mpa.AFSM Series centrifugal pump is made of ZSM material. AFSM centrif...
Flow rate: 2-2000m3/h
Head: 3-60m
pump material: stainless steel ,alloy steel,duplex steel
centrifugal pump: chemical pump
-
AFSM Wear resisting corrosion resisting alloy steel pump
AFSM wear resisting and corrosion resistant alloy steel pump, high temperature dilute sulfuric acid corrosion wear resisting pump, metal smelting pulp pumpIntroduction:AFSM wear resisting corrosion resisting alloy pump, the range of performance includes all IH series and F series chemical pump performance. ASFM wear resisting corrosion resisting alloy pump can be widely used in chemical, petroleum, metallurgy, power station, food, pharmaceuticals, synthetic fiber and other departments to transfer corrosive medium with temperat...
Flow rate: 3-200m3/h
Head: 5-45m
pump material: alloy steel
wear resisting pump: corrosion resisting pump
-
LWP,WLP Vertical stainless steel sewage pump
WLP/LWP vertical stainless steel sewage pump is mainly composed of shaft, bearing frame, pump cover, impeller, pump seat, motor bracket, motor and other components. The pump is a vertical single stage single suction volute pump and the impeller adopts a double flow channel structure, which can pass the fluids with fiber diameter 5 times as pump diameter and the fluids with solid particles diameter 50% as the pump diameter. WLP/LWP Vertical stainless steel sewage pump is made of stainless steel material.WLP/LWP Vertical sewage p...
Flow rate: 2-1500m3/h
Head: 3-45m
pump material: stainless steel
centrifugal pump: sewage pump
-
GWP Stainless steel vertical pipeline sewage pump
GWP Stainless steel vertical pipeline sewage pump is made of stainless steel material and used to transfer the dirty water containing solid particles or long fiber etc impurity or the clear water or corrosive liquids. GWP Stainless steel vertical pipeline sewage pump is convenient to install and can also be used as a general pipeline pump for booster supply water pump in high building. The pump adopts the unique single flow channel or double flow channel impeller and with a reasonable volute. The impeller has very good flow passage. So the pum...
Flow rate: 8-1500m3/h
Head: 5-60m
pump material: stainless steel
centrifugal pump: sewage pump
-
FPG Vertical reinforced polypropylene centrifugal pump
FPG Series RPP corrosion resistant pipeline centrifugal pump is made of reinforced polypropylene (RPP) by one injection molding. The pump is vertical structure with the same inlet and outlet diameter and is located on the same central line.FPG Series RPP corrosion resistant pipeline centrifugal pump has the compact structure, beautiful appearance, small volume, high mechanical strength, good corrosion resistance, high efficiency and economic cost etc advantages. The pumped liquids do not contact with the metal and shaft seal uses the e...
Flow rate: 3-22m3/h
Head: 10-28m
pump material: RPP (reinforced polypropylene
centrifugal pump: chemical pump
-
ZLB Vertical axial flow pump irrigation pump drainage water pump
ZLB Series vertical axial flow pump is the single stage vertical axial flow pump. The pump is suitable to pump clean water, sewage ,rainwater or slightly corrosive liquids. The pumped liquids temperature is not higher than 50 degree Celsius.ZLB Vertical axial flow pump has the large flow rate and low lift head. The pump is widely used in farmland irrigation, water conservancy projects, urban water supply, drainage and sewage treatment, power plants, salt plants and farms for circulating water, dock rising or falling water level ,also in metal...
Flow rate: 1000-12000m3/h
Head: 2-7m
pump material: cast iron or stainless steel
axial flow pump: transfer pump
-
ZJ single stage centrifugal slurry pump mortar pump sewage pump
ZJ Single stage centrifugal Slurry Pump ZJ(L) series are designed as single stage, single suction double casing centrifugal slurry pumps. The pumps are classified into vertical(ZJL) and horizontal(ZJ) construction. The ZJ(L) series pumps adopts international advanced solid and liquid two phase flow theory and are made of wear resistant parts. Slurry Pump ZJ(L) series are suitable for handling abrasive and corrosive slurry with solid particles. the concentration of solid and liquid mixed mortar was 45%, the mine slurry is 60%, the m...
Flow rate: 5-2000m3/h
Head: 4-130m
pump material: high chrome alloy
centrifugal pump: slurry pump
-
CP Stainless steel horizontal canned pump chemical industry centrifugal pump
Canned pump is a no leakage pump composed of canned motor and pump. The pump has the main parts such as pump body, impeller, stator, rotor, front and rear bearings and thrust disc and other parts. The stator and rotor are separated by non magnetic corrosion resistant thin wall sleeve respectively. The rotor is supported by front and rear bearings and immersed in the conveying medium. So no dynamic seal is needed to prevent the leakage of the conveying medium.Canned pump is absolutely no leakage. When pump case is in negative pressure, external air...
Flow rate: 2-250m3/h
Head: 5-120m
pump material: stainless steel
canned pump: screen pump
-
FY pneumatic slurry pump
FY pneumatic slurry pump adopts the air pressure difference to make the piston run up and down and then drive the guiding plunger to open and close and finally lift the liquid. The flow rate for pneumatic slurry pump can be controlled and adjustable by adjust the air flow and air pressure. It can be equipped with sensor switches in order to work automatically.FY pneumatic slurry pump is especially suitable to transfer chemical slurry with high viscosity (VIS:120000 CPS) at 25 degree Celsius. The pump is widely used to transfer viscous liqui...
Flow rate: 10-100L/MIN
Head: 30M
pump material: stainless steel
Slurry pump: high viscosity pump