Products List 1
-
Tobee AHF Horizontal Froth Pump Throat bush Wet Parts FAHF6083R55
Sales7(at)tobeepump.comWeb: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.ccTobee® Manufactured AHF Horizontal Froth Slurry Pump Parts, the Wetted Parts Throat Bush FAHF6083R55 can be used for 6E-AHF and 6F-AHF Froth Slurry Pump.The throat Bush links plate liner and forms a Pump chamber to work with impeller, as one of wetted parts for the slurry pump, Its wear-resistance is very important to pump work-life. Tobee pump offers Cr27Mo high chrome alloy which is high abrasion resis...
-
Tobee Throat Bush G12083A05 for 14/12ST AH Slurry Pump
Sales7(at)tobeepump.comWeb: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.ccTobee manufactures all replacement slurry pump parts which are fully fit for Warman, Metso, Goulds, Andritz, Sulzer, GIW, Dragflow, Toyo and other OEM slurry pump parts. Such as the Slurry Pump Throat Bush G12083A05 is interchangeable with AH Slurry Pump Throat Bush.Tobee’s foundry is a vertically integrated facility, with design, pattern prep, molding, casting, heat treating, machining and assembly. We can as...
-
Tobee 8/6 AH Slurry Pump Wetted Parts Throatbush F6083A05A
Sales7(at)tobeepump.comWeb: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.ccTobee® F6083A05A Throat Bush Parts is an important wear parts in 8/6 AH Slurry Pump, and the Throat bush is common in bigger pumps, because throat bush and volute liner are normally in one solid piece in small pumps. The design of slurry pump throat bush is based on cost effective in manufacturing and operation.Tobee™ 8/6 AH Slurry Pump After-sales Service:As the slurry pump wet ends parts such as the impeller,volute liner,...
-
Tobee 16x14TU-AH Slurry Pump Parts Throat Bush H14083A05
Sales7(at)tobeepump.comWeb: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.ccTobee® Slurry Pump Throat Bush H14083A05 is interchangeable with AH Slurry Pump Throat Bush, It links plate liner and forms a Pump chamber to work with impeller, as one of wetted parts for the slurry pump, Its wear-resistance is very important to pump work-life. The throat bush-Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal...
-
Tobee F6145WRT1A05 Impeller for 8x6E-AH Slurry Pumps
Sales7(at)tobeepump.comF6145WRT1A05 Impeller and F6083WRT1A05 Throat Bush combination is a superior upgrade for your 8x6E-AH slurry pump designed to enhance efficiency and improve wear performance. Slurry Pump WRT impeller and throatbush design. The slurry pump WRT parts combination's new 4 vane impeller design incorporates a unique vanelet on the back shroud which streamlines the flow through the impeller. Other enhancements include improved hydraulic profiles, reduced turbulence, extended wear performance and l...
-
Tobee F6083WRT1A05 Throatbush for 8/6 FAH Slurry Pumps
Sales7(at)tobeepump.comF6083WRT1A05 Throatbush is one of the wetted parts for 8/6F-AH Slurry Pumps, it's also used for 8/6E-AH Slurry Pumps. The WRT impeller and throatbush combination with improved hydraulic profiles, reduced turbulence, extended wear performance and lowered power consumption.Slurry Pump WRT Parts Design Benefits:• Increased wear life – the WRT impeller and throatbush combination is designed to increase wear life between 30% and 50%• Power savings – lower pump power consumption• Cost re...
-
Tobee Hi-seal Slurry Pump Parts Stuffing Box C078HS1D21
Sales7(at)tobeepump.comTobee® Slurry Pump Stuffing Box C078HS1D21 is one of shaft seal parts in 3x2C-AH gland packing seal pumps where the packing is housed in. The packing area of stuffing box is longer than expeller ring, so it can contain more packing.Slurry pump stuffing box of a sailboat will have a stern tube that is slightly bigger than the prop shaft. It will also have packing nut threads or a gland nut. The packing is inside the gland nut and creates the seal. The shaft is wrapped by the packing and put in the gland nu...
-
Tobee 10x8 inch Slurry Pump Stuffing Box G078HS1A05
Sales7(at)tobeepump.comTobee® Hi-seal Stuffing Box G078HS1A05 is one of shaft seal parts for 10x8 F-AH Slurry Pump. And it is a packing assembly or a shaft seal that is used as a sealing device to prevent leakages of air or water or steam from rotating or sliding shaft. They are mostly used in the pump to prevent fluid leakage.When it comes to centrifugal slurry pump maintenance, a stuffing box is the best option for time-sensitive issues that may arise. A stuffing box separates the non-rotating parts from those that rotate. I...
-
Tobee 10x8E-M Medium Duty Horizontal and Centrifugal Slurry Pump
Sales7(at)tobeepump.com10x8E-M Medium Duty Slurry Pump is cantilevered, horizontal and centrifugal with double casing structure, It mainly suitable for pumping medium concentration slurries, 10x8E-M slurry pump applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.M Type Centrifugal Slurry Pump Design Features:√ Modular design for ease of maintenance.√ Medium duty one piece frame base with lifting points for easy mainten...
-
Tobee 6/4E AH Slurry Pumps Ceramic Spare Parts
Sales7(at)tobeepump.comTobee® Ceramic Slurry Pump Wetted End Parts with is interchangeable with AH series slurry pump parts. with many good characteristics of abrasion resistance, corrosion resistance etc. Now the slurry pump ceramic parts are continually provided for coal power generation, non-ferrous foundry, mining and others. The corrosion and abrasion resistance of ceramic slurry pump parts are highly exceed ones made by high chrome alloy. The abrasion resistance of ceramic parts are 5 times as wearable as high chrome...
-
Tobee Slurry Pump Parts Shaft DAM073ME05
Sales7(at)tobeepump.comTobee® Slurry Pump Shaft DAM073ME05 is the most important parts for bearing assembly in 3x2D-HH Slurry Pump or 6x4D-AH Slurry Pump. The shaft is to connect the slurry pump impeller and motor as a complete pump working system. Its stability will directly affect pump operation and work life.Slurry pump shaft is one of drive end parts which connect impeller to drive device. Slurry pump shafts are normally made in carbon steel, special material is also available.Slurry pump shaft is one of drive end part...
-
Tobee B15127 A05 Impellers for AH 2X1.5B Slurry Pumps
Sales7(at)tobeepump.comB15127 A05 Impeller is the best important spare part for 2x1.5B-AH Metal Lined Slurry Pump. Slurry Pump impeller is one of the most important parts of centrifugal slurry pump. Depending on site application, slurry pump impeller selection can be crucial to pump performance. Slurry applications can be especially hard on the impeller of slurry pump because of their abrasive nature. In order for your process to operate efficiently and stand up to the test of time, you must choose the proper slurry pump impe...
-
Tobee 10/8 AH Slurry Pumps and Interchangeable Spare Parts
Sales7(at)tobeepump.comSlurry Pumps Spares are essential parts for slurry pump operation, including the volute liner, throat bush, frame plate liner insert and the impeller.Metal Lined Slurry Pump SparesCover Plate / Throat Bush / Volute Liner / Impeller / Frame Plate Liner Insert / Stuffing Box / Frame Plate / Shaft Sleeve / Expeller / Expeller ring / Bearing AssemblyRubber Lined Slurry Pump SparesThroat Bush / Cover Plate Liner / Impeller / Frame Plate Liner Insert / Expeller ringPolyurethane...
-
Tobee 8/6E-AH Rubber Heavy Duty Slurry Pumps
Sales7(at)tobeepump.com8/6E-AH Rubber Heavy Duty Slurry Pump with anti-corrosive rubber wetted parts for for handling strong corrosive or abrasive slurries of small particle size without sharp edges in the mining. 8/6E-AH Rubber Lined Slurry Pump is the standard heavy duty slurry pumps which designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, It maintains high efficiencies over the wear life of its components. 8/6 slurry pump typically used in process plant...
-
Tobee U38/U01 Polyurethane Frame Plate Liner C2036HS1
Sales7(at)tobeepump.comPolyurethane Frame Plate Liner C2036HS1U38 is used for 3x2C-AH Horizontal Slurry Pump. Tobee® Slurry Pump Polyurethane Liners have Cover plate liners, Frame plate liner, The liners are together with throat bush and Frame plate liner insert form a pump chamber, The impeller works in it. The polyurethane liners are generally made of polyurethane without steel skeleton. But the polyurethane impeller, throat bush and frame plate liner insert are embedded the steel skeleton. Design Features of Sl...
-
Tobee 14x12ST AH Slurry Pump G118K31 Lantern Restrictor
Sales7(at)tobeepump.comG118-K31 Lantern Restrictor of 14x12ST-AH Horizontal Slurry Pump Spare Parts. In slurry pumps, a slurry pump lantern restrictor is located between slurry pump gland packing and slurry pump impeller. It works as a lantern ring, but at the same time has clearances that restrict the flow into the pump. These clearances result in significantly more flush water being required, as there is no longer the interference fit between the ring of gland packing and slurry pump shaft.By using a lantern restrictor, if ...
-
Tobee DH2147A05 A61 Impeller of 3x2D HH Pump Wear Parts
Sales7(at)tobeepump.comTobee's 3x2D-HH Slury Pump Parts High Chrome Impeller DH2147 can made of A05, A61, A33, A49, A07, A12, etc. Slurry Pump Impeller DH2147 is the main component in 3/2D-HH or 3/2DD-HH centrifugal slurry pumps which has vanes to impart and direct the centrifugal force to the slurry. Slurry pump impeller is also the most diverse component in slurry pumps, by changing impeller, the same slurry pump can cover more different duties.Tobee manages a complete inventory of slurry pump impellers which a...
-
Tobee 4x3D AH Gland Packing Slurry Pump D111Q21 Packings
Sales7(at)tobeepump.comD111Q21 Gland Packings is one of the important parts for Packing Seal Slurry Pumps 4x3D-AH, 4x3C-AH, 6x4D-AH, 3x2D-HH, 3x2DD-HH. Slurry Pump Gland Packing is used to prevent leakage of fluid, such as water or slurry, chemicals, between sliding or turning parts of slurry pumps. The gland nut allows the packing material to be compressed to form a watertight seal and prevent the slurry from leaking up the shaft when the tap is turned on.The gland packing at the rotating shaft of a slurry pump is...
-
Tobee Ceramic Shaft Sleeve D075J04 for 4/3 DAH Slurry Pump
Sales7(at)tobeepump.comD075J04 White Ceramic Shaft Sleeve can replace the standard Shaft Sleeve D075C21 for 4x3D-AH Slurry Pumps and 6x4D-AH Slurry Pump. Slurry Pump Ceramic Shaft Sleeve, which has undergone destructive field tests for over 18 months, has proved to extend part life several times that of steel shaft sleeves on the same pump, same service. Total maintenance costs and down-time were reduced accordingly. Tobee's slurry pump ceramic shaft sleeves are precision formed of high density alumina, fired, and g...
-
Tobee Bearing Housing E004M of 8/6 EAH Slurry Pump Parts
Sales7(at)tobeepump.comE004M Bearing Housing is one of the most important part for 8/6E-AH Horizontal Slurry Pumps. Slurry Pump Bearing Housing basic part number is 004, it is container of bearings and shaft. There are four clamp bolts through the base which fasten the slurry pump bearing housing.Slurry pump bearing housings are normally made in grey iron material, ductile iron is also available.Slurry Pump Bearing Housing part codes: B004M, C004M, D004M, E004M, F004M, X004M, R004M, S004M, T004M, G004M...