Products List 2
-
Tobee Hi-seal Frame Plate Liner CAM3036HS1R55 for 4x3 CAH Pump
Sales7(at)tobeepump.comRubber Frame Plate Liner CAM3036HS1R55 is used for 4x3C-AH Rubber Lined Slurry Pump. Tobee® Rubber Lined Slurry Pump Parts namely the rubber parts have direct connection with slurries, They are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries in the high speed, The wetted parts include impeller, cover plate liner, frame plate liner, throat bush, frame plate liner insert etc, These wear parts are very crucial to the service life of slu...
-
Tobee 6/4D-AH Rubber Pump Frame Plate Liner E4036HS1R55
Sales7(at)tobeepump.comRubber Frame Plate Liner E4036HS1R55 is the main wear parts for 6/4D AH Rubber Lined Slurry Pump and 6/4E AH Rubber Lined Slurry Pump. Tobee® Rubber Lined Slurry Pump Parts namely the rubber parts have direct connection with slurries, They are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries in the high speed, The wetted parts include impeller, cover plate liner, frame plate liner, throat bush, frame plate liner insert etc, These w...
-
Tobee 6 VCG Impeller F6058A49 of 8x6E-AH Slurry Pump
Sales7(at)tobeepump.comTobee® A49 material Impeller F6058A49 of 6 vanes with closed type can be used for 8x6E-AH Centrifugal Slurry Pumps. Slurry Pump Impeller is the main component in centrifugal slurry pumps which has vanes to impart and direct the centrifugal force to the slurry. Depending on site application, slurry pump impeller selection can be crucial to pump performance. Slurry applications can be especially hard on the impeller of slurry pump because of their abrasive nature. In order for your process to operate efficientl...
-
Tobee 2x1.5 BAH Horizontal Slurry Pump Spares and Parts
Sales7(at)tobeepump.comTobee® 2/1.5B AH Slurry Pump is the world’s standard for heavy duties. A wide variety of impellers and shaft seals provide a perfect fit for a wide range of applications. The slurry pump provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. Together with the Tobee® MC series slurry pump, the AH horizontal slurry pump provides a complete selection for most all duties in the mill. From cyclone feed to regrind, flotation and tailings, s...
-
Tobee wear parts Impeller G12147A05A of 14x12G-AH Slurry Pump
Sales7(at)tobeepump.comTobee® Slurry pump Impeller G12147A05A is the most diverse component in 14x12G-AH Slurry Pumps, by changing impeller, the same slurry pump can cover more different duties. And they are normally made in high chromium alloys or natural rubber, special materials are also available.Tobee® offers three different types of slurry pump impellers: open, closed, and semi-open, and slurry pump impellers are made of high chrome alloy, rubber, elastomer, polyurethane, ceramic and some other customized materials to meet...
-
Tobee Slurry Pump WRT1 Impeller FAM8145WRT1A05A
Sales7(at)tobeepump.comTobee® Slurry Pump WRT Impeller FAM8147WRT1A05A is closed type with 4 vanes for 10x8AH Centrifugal Slurry Pumps. Its design incorporates a unique vane let on the back shroud which streamlines the flow through the impeller. Tobee® WRT Spare Parts Wear Reduction Technology:• Increased wear life – the impeller and throat bush combination will increase wear life between 30% and 50%• Power savings – lower pump power consumption• Cost reduction – higher pump efficiency sustained over a longer pu...
-
Tobee 3/2C-AH Slurry Pump Intake Joint Seal C2060S01
Sales7(at)tobeepump.comSlurry Pump Intake Joint Seal C2060S01 is rubber pump seal spares of 3x2C AH Slurry PumpSlurry pump intake joint ring is one of wet end parts which is used to seal the outlet of metal lined slurry pump for sealing slurry pump and pipeline or valve connected to the slurry pump suction end.Slurry pump intake joint made in rubber material like S01,S12,S42,R55,S31,S14,S10,S51 etc.Slurry pump intake joint supplied by Tobee is suit: AH slurry pumps, L slurry pumps, M slurry pumps, HH slurry pumps, G a...
-
Tobee 6/4E-AH Slurry pump intake joint seal E4060S01
Sales7(at)tobeepump.comE4060S01 intake joint is installed on 6/4 E-AH Slurry Pumps.Slurry pump intake joint ring is one of wet end parts which is used to seal the outlet of ah slurry pump for sealing slurry pump and pipeline or valve connected to the slurry pump suction end.Slurry pump intake joint made in rubber material like S01,S12,S42,R55,S31,S14,S10,S51 etc.Slurry pump intake joint supplied by Tobee is suit: AH slurry pumps, L slurry pumps, M slurry pumps, HH slurry pumps, G and GH gravel sand pumps.
-
Tobee 8/6F-AH Slurry pump joint seal spares F6060S01
Sales7(at)tobeepump.comF6060S01 Slurry pump intake joint is used to 8x6F AH gland seal slurry pump suction end.Slurry pump intake scharge joint made in rubber material like S01,S12,S42,R55,S31,S14,S10,S51 etc.Slurry pump intake joint installed on slurry pump suction flange to act on pipeline or valve connected to the pump suction end. Slurry pump intake joint is also one of slurry pump wetted end parts which can directorly touch the slurries and play a sealing role of the material.
-
Tobee Rubber Liner Centrifugal Pumps 1.5/1B AHR
Sales7(at)tobeepump.comTobee's 1.5/1B-AHR Slurry Pumps are made of Natural Rubber Liners and Impeller, R08, R26, R55, S02, S12, S21, S31, S42 are also available. 1.5/1B-AHR Rubber Lined Slurry Pump is the standard heavy duty slurry pumps which designed with rubber lined. It is more suitable in delivering strong corrosive or abrasive slurries of small particle size without sharp edges. The rubber lined slurry pumps typically used in process plant transfers, corrosive and caustic wet waste, recycling-washing plants,...
-
Tobee 1.5/1B-AH Horizontal Slurry Pump Spares Intake Joint B1060S01
Sales7(at)tobeepump.comB1060-S01 (Rubber) Intake Joint is used for 1.5/1B-AH (R) Slurry Pumps. Slurry Pump Intake Joint is used for sealing the pump with inlet pipeline or inlet valve for preventing leak from suction end, It is installed on slurry pump suction flange.Slurry pump intake joint made in rubber material like S01,S12,S42,R55,S31,S14,S10,S51 etc.
-
Tbee 4/3E-HH Horizontal Slurry Pumps
Sales7(at)tobeepump.com4/3E HH Horizontal Slurry Pump for produce high heads per stage at high pressures. 4/3E-HH High Head Slurry Pump is fit for a variety of applications ranging from filter press feeds to pipeline transport staging pumps. The high heads along with sturdier wear parts makes these pumps some of the most rugged in the slurry pump line. Extensive exterior ribbing allows for higher heads to be reached with a single slurry pump, and bulked up wet end parts handle the toughest applications in the field today.Des...
-
Tobee Impeller C2147A05A for 3x2C-AH Slurry Pump
Sales7(at)tobeepump.comTobee® Slurry Pump impeller C2147A05A is one of the most important parts of 3x2C-AH Centrifugal Slurry Pump. It is closed type with 5 vanes. It is easy to be worn out, so we search for the special materials to prolong the lifespan of impeller, high chrome alloy is one of them, aims at handling the slurries with strong abrasion or sharp particles.Here are three different types of slurry pump impellers: open, closed, and semi-open. Each has its own strengths and weaknesses, depending on the application. Some ar...
-
Tobee 2x1.5B-AHR Rubber Pump Frame Plate Liner B15036HS1R55
Sales7(at)tobeepump.comRubber Frame Plate Liner B15036HS1R55 is one of important wear parts for 2x1.5B-AHR Rubber Lined Slurry Pumps. Tobee® Rubber Lined Slurry Pump Parts namely the rubber parts have direct connection with slurries, They are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries in the high speed, The wetted parts include impeller, cover plate liner, frame plate liner, throat bush, frame plate liner insert etc, These wear parts are very crucial to ...
-
Tobee replace Warman Slurry Pump WRT Impeller G10145WRT1A05
Sales7(at)tobeepump.comTobee® Slurry Pump WRT Impeller G10145WRT1A05 is closed type with 4 vanes for 12X10ST-AH Centrifugal Slurry Pumps. Its design incorporates a unique vane let on the back shroud which streamlines the flow through the impeller. WRT1 Impeller Wear Parts Code List: AH Slurry Pump WRT1 Impeller Code Standard impeller Code 3x2C-AH C2145WRT1A05 C2147A05 4x3C-AH,4...
-
Tobee equivalent Warman 4x3D AH Silica Sand Pumps
Sales7(at)tobeepump.comTobee® 4x3 AH Silica Sand Pump is end-suction, split-case, centrifugal slurry pumps have set the world standard for heavy duty abrasive pumping applications for decades. With large shaft diameters, heavy duty bearing assemblies and robust slurry pumping capacity, Tobee 4x3 pumps provide a cost-effective and ideal alternative to longer lead times and the difficulty associated with working with large multinational.Tobee® 4x3 DAH Slurry Pumps for handling highly abrasive, high density slurries with...
-
Tobee 3x2C-AHR Slurry Pump Frame Plate Liner C2036HS1R55
Sales7(at)tobeepump.comC2036HS1R55 Rubber Frame Plate Liner is used for 3x2C-AHR Rubber Lined Slurry Pump. Slurry Pump Rubber Frame Plate Liner is the main wear parts for the rubber lined slurry pump. It forms a pump chamber with cover plate liner and throat bush to contact with slurries, As one of main wetted parts, Frame plate liner very easily worn-out components because it works under longtime impact of abrasive and corrosive slurries in the high speed conditions, So the materials is very crucial to lifetime of c...
-
Tobee Slurry Pump Impeller GAM14147A05A with 5 vanes
Sales7(at)tobeepump.comTobee® Slurry Pump Impeller GAM14147A05A is the main wear parts for 16x14TU-AH Slurry Pump, and it is closed type impeller with 5 vanes. And the slurry pump impeller is the rotating component within the centrifugal slurry pump design, which transfers the energy from the pump's motor to the fluid.For Slurry pump impeller normally made of High chrome alloy, elastomer, polyurethane and some other costumed. But High chrome alloy and elastomer are the main material for the slurry pumps. There are Open, Semi...
-
Tobee High Chrome Impeller H18137DPT2A05 for 20x18 AH Slurry Pump
Sales7(at)tobeepump.comTobee® Slurry pump impeller H18137DPT2A05 is one of the most important parts of centrifugal slurry pumps. Depending on the application, Slurry pump impeller selection can be crucial to slurry pump performance. Slurry applications can be especially hard on the impeller of your slurry pump because of their abrasive nature. 20/18 AH Slurry Pump Design features and benefits:• Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime• Ductile iron fully lined casing provide...
-
Tobee Weir 14x12F-AH Slurry Pump Spares Shaft Sleeve FAM075-D20
Sales7(at)tobeepump.comFAM075-D20 Shaft Sleeve is one of spare parts for 14x12F-AH Centrifugal Slurry Pumps. The Shaft Sleeve spare part code is 075 and 076. We have slurry pump shaft sleeve in material 4Cr13, Ceramic coated, tungsten carbide coated and stainless steel, to meet different applications. The slurry pump shaft sleeve protects the pump shaft from slurry abrasion and corrosion, enhance the pump life time.Slurry Pump Shaft Sleeve is also a quick - wear part of slurry pumps. The design and material of shaft ...