Products List 1
-
PFA FULL LINED CONTROL VALVE
Pneumatic/Electric lined bellows control valve is the execution unit in automation instrument system; it consists of many spring film actuators/electric actuators and through-way fluorine-lined single-seat regulator. Installed on the medium pipeline and operated with other instrument to control parameters such as flow rate etc. Due to the wetted parts of valve are lined with fluorine plastic (PFA, FEP), and the stem sealing adopts PTFE bellow and packing, it has better performance on corrosion resistance and sealing and its installation has...
SIZE: 1/2"-16"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: PN1.0 PN1.6 150LB
LINER: PFA, FEP, PTFE
-
Pneumatic Ceramic Ball Valve for Slurry Service
Pneumatic Ceramic Ball Valve for Ash, Slurry, Acid. Anti-corosion and wear-resisting,DN15~250Product Description:1.Trim components of ceramic ball valve adopt Alumina or zirconia ceramic with high chemical stability and hardness (HRC88),only inferior to diamond. The ceramic lined valve has very good performance on abrasion erosion, and corrosion resistance, and excellent heat-shielding, electric insulation. 2.The ball is made by advanced grinding equipment and advanced process technology that can ensure high precision ball roundness, ...
SIZE: 1/2"-16"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: Class150 , Class300 , PN10 , PN16
LINER: PFA, FEP, PTFE
-
EPDM Rubber Lined Casted Steel Diaphragm Valve
Diaphragm valves are used on shut-off and throttling service for liquids, slurries and vacuum/gas.The seal is achieved by a flexible membrane, usually elastomer, and possibly reinforced with a metal part. The membrane is tensed by the effect of a stem/compressor with lineal movement until contact is made against the seal of the body.The operating parts of the diaphragm valve are isolated from the flow. This makes this valve suitable for viscous flows and also hazardous, abrasive and corrosive flows as its sealing system avoids any contamination towa...
SIZE: 1/2"-16"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: PN1.0 PN1.6 150LB
-
PFA FULL LINED GATE VALVE
PFA Lined Gate Valve Rising Stem typeTechnical SpecificationDesign and Manufacture Standard: ASME B16.34, HG/T 3704Face-to-face Dimension: ASME B16.10 , GB/T 12221Flange Standard: ASME B 16.5 ,GB/T 9119 ,DIN ,JISInspection and Testing: API 598, GB/T 13927Product SpecificationBody Material: WCB, ASTM A395 , CF8 ,CF8MLining Material: PTFE , PFA , PO ,FEPNominal Diameter: 1"-14"(DN25~DN350)Pressure Range: Class150 , PN10 , PN16Operation Method: M...
SIZE: 1/2"-16"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: PN1.0 PN1.6 150LB
-
PFA FULL LINED CHECK VALVE
PFA Lined Swing Check ValveTechnical SpecificationDesign and Manufacture Standard: ASME B16.34, HG/T 3704Face-to-face Dimension: ASME B16.10, GB/T 12221Flange Standard: ASME B 16.5, GB/T 9119, DIN, JISInspection and Testing: API 598, GB/T 13927Product SpecificationBody Material: WCB, ASTM A395, CF8, CF8MLining Material? ? PTFE, PFA, PO, FEPNominal Diameter: 1/2"-14"(DN15~DN350)Pressure Range: Class150, PN10, PN16Product description:1. Youfumi Lined check ...
SIZE: 1/2"-16"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: PN1.0 PN1.6 150LB
-
PTFE FULL LINED BUTTERFLY VALVE
PTFE/PFA Lined Butterfly Valve large type PN16Technical SpecificationDesign and Manufacture: ASME B16.34End-to-end dimension: ASME/ANSI 16.10Flange Standard: ASME/ANSI 16.5Inspection and testing: API 598Product SpecificationBody Material: A216/WCB, A351/CF8, A351/CF8M, A351/CF3, A351/CF3M, LCB, A536Stem Material: SS304, SS410, SS416, SS420Seat Material: PFA, PO, FEPDisc Steel: A216/WCB, A351/CF8, A351/CF8M, A351/CF3, A351/CF3MLining Material: P...
SIZE: 1/2"-80"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: PN1.0 PN1.6 150LB
-
PFA FULL LINED GLOBE VALVE
PFA Lined Globe Valve ansi ChemicalTechnical SpecificationDesign and Manufacture Standard: ASME B16.34, HG/T 3704Face-to-face Dimension: ASME B16.10, GB/T 12221Flange Standard: ASME B 16.5, GB/T 9119, DIN, JISInspection and Testing: API 598, GB/T 13927Product SpecificationBody Material: WCB, ASTM A395, CF8, CF8MLining Material: PFA, FEP, PTFENominal Diameter: 1/2"-14"(DN15~DN350)Pressure Range: Class150, PN10, PN16Operation Method: Manual, Worn gear, Ele...
SIZE: 1/2"-16"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: PN1.0 PN1.6 150LB
SEAT: PFA, FEP, PTFE
-
PFA/PTFE FULL LINED CROSS
PTFE Lined Pipe Fittings for gas oilTechnical SpecificationDesign and Manufacture: ASTM F1545-97Flange Standard: ASME/ANSI 16.5, DIN, JISInspection and testing: ASTM F1545-97Product SpecificationPipe Material: ASTM A106Lining Material: PTFE, PO, PE, PPFlange Material: SS304, SS304L, SS316, SS316L, ASTM A3Nominal Diameter: NPS 1-24Pressure Range: 150lb 300lb JIS 10k, DISConnection Type: Flange connectionProduct description:1. Youfumi manufactures lined pipe and f...
SIZE: 1/2"-16"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: PN1.0 PN1.6 150LB
LINER: PFA, FEP, PTFE
-
PTFE Lined Eccentric Reducer Pipe
PTFE Lined Eccentric Reducer PipeTechnical SpecificationDesign and Manufacture: ASTM F1545-97Flange Standard: ASME/ANSI 16.5 ,DIN,JISInspection and testing: ASTM F1545-97Product SpecificationPipe Material: ASTM A106Lining Material: PTFE,PO,PE,PPFlange Material: SS304,SS304L,SS316,SS316L,ASTM A3Nominal Diameter: NPS 1-24Pressure Range: 150lb 300lb JIS 10k,DISConnection Type: flange connectionProduct description:1.Youfumi manufactures lined pipe and fitti...
SIZE: 1/2"-16"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: PN1.0 PN1.6 150LB
LINER: PFA, FEP, PTFE
-
PTFE Expansion Joint Ss304 Shell Composite
PTFE Expansion Joint SS304 shell compositeTechnical SpecificationDesign and Manufacture Standard: HG/T 3985, GB/T 15700Flange Standard: ASME B 16.5, GB/T 20592, DIN, JISProduct SpecificationBody Material: A105, SS304, SS316, SS316LLining Material: PTFE, EPDM+PTFE, SS304+PTFENominal Diameter: 1"-80"(DN25~DN2000)Pressure Range: Class150, PN10, PN16Product description:1. Expansion joint is also called bellows or compensators, which are designed for axial, lateral and angular m...
SIZE: 1/2"-16"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: PN1.0 PN1.6 150LB
LINER: PFA, FEP, PTFE
-
PFA Lined RF Flanged Safety Valve
Lined safety valve is developed according to use the domestic and foreign advanced technology. This valve is used in the chlor-alkali chemical industry, hydrochloric acid, sulfuric acid and other high-risk corrosive medium, protects system security on the pressure equipment and pressure container. The valve uses PTFE bellows seal that has anti-leakage function. Inner cavity of the valve body is fully PFA or F46 lined more than 2.5 mm thickness. All components of YFM safety valves are made withPTFE-lined materials, including ...
SIZE: 1/2"-16"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: PN1.0 PN1.6 150LB
LINER: PFA, FEP, PTFE
-
PFA FULL LINED DIAPHRAGM VALVE
PFA Lined Diaphragm Valve Technical SpecificationDesign and Manufacture: ASME B16.34End-to-end dimension: HG/T3704Flange Standard: ASME/ANSI 16.5Inspection and testing: API 598Product SpecificationBody Material: A216/WCB, A351/CF8, A351/CF8M, A351/CF3, A351/CF3M, LCB, A536Disc: A216/WCB, A351/CF8, A351/CF8M, A351/CF3, A351/CF3MDiaphragm Part: EPDM+PFA, FEPLining Material: PTFE, FEP, PFA, PONominal Diameter: NPS 1/2-16Pressure Range: 150lb 300lb...
SIZE: 1/2"-16"
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: PN1.0 PN1.6 150LB
LINER: PFA, FEP, PTFE
-
PFA FULL LINED BALL VALVE
PFA Lined Ball Valve SS304 BodyFeatures:1. Size: 1/2-16"2. Body: WCB(CAST STEEL), CF8, CF8M, CF3, CF3M3. Lining material: PFA, FEP, PTFE4. CLASS: PN1.0 PN1.6 150LBStandard compliance:1. ) Design and manufacture: ANSI B16.34, or DIN, JIS2. ) Face to face dimensions: ANSI B16.10 GB122213. ) End flange dimensions: ANSI B16.5 JB78, DIN, JIS4. ) Test: API 6D or API 598Type of operation:1. ) Lever2. ) Connection dimension of worm gear actuator, electric actuat...
SIZE: 1/2"-16"
BODY MATERIAL: PFA, FEP, PTFE
PRESSURE: PN1.0 PN1.6 150LB
-
PFA FULL LINED PLUG VALVE
PFA Lined Plug Valve Flange type for corrosion mediumTechnical SpecificationDesign and Manufacture Standard:ASME B16.34, HG/T 3704Face-to-face Dimension: ASME B16.10 , GB/T 12221Flange Standard: ASME B 16.5 ,GB/T 9119 ,DIN ,JISInspection and Testing: API 598, GB/T 13927Product SpecificationBody Material:WCB, ASTM A395 , CF8 ,CF8MLining Material: PTFE , PFA, FEPNominal Diameter: 1/2"-14"(DN15~DN350)Pressure Range: Class150 , Class300 , PN10 , PN16Op...
SIZE: 1/2"-14"(DN15~DN350)
BODY MATERIAL: WCB, ASTM A395 , CF8 ,CF8M
PRESSURE: Class150 , Class300 , PN10 , PN16