Products List 3
-
Chemical pump corrosion resistant acid transfer PTFE or FEP material
Chemical industry corrosion resistant acid transfer pump is suitable to convey or transfer the various acids and other corrosive medium for - 20 degree Celsius to 120 degree Celsius. The wet parts of flow passage for the pump are all made of plastic alloy (ptfe and fep, polyethylene, polypropylene and other materials). The plastic material has a strong corrosion performance, and has high mechanical strength, No aging, no toxin decomposition and other advantages. The plastic acid transfer pump is an ideal equipment for conveying a variety of strong...
flow rate: 2-400m3/h
head: 5-80m
pump material: PTFE, FEP, F46
Magnetic driving pump: plastic centrifugal pump
-
ZS horizontal stainless steel single stage centrifugal feed water pump
Pump Summary:ZS horizontal stainless- steel single-stage centrifugal pump is a new generation of centrifugal pump, which is made of advanced technologies such as stainless-steel plate stamping, expanding and welding. It can replace traditional IS pump and general corrosion resistant pump. The utility model has the advantages of beautiful appearance, light structure, high efficiency, energy saving, durability, light corrosion resistance, low noise, etc.Operating conditions of horizontal stainless steel single-stage centrifugal pump:Clean, thin, ...
flow rate: 6-200m3/h
head: 18-75m
pump material: SS304
single stage end suction centrifugal pump: stainless steel feed water pump
-
Electromechanical centrifugal lift water pump
Power centrifugal electromechanical pumpPower pump or electromechanical centrifugal pump is used for conveying clean water and other liquids with physical and chemical properties similar to clean water. It is the high-efficiency and energy-saving pump designed and manufactured according to ISO2858 standard.Pump and motor are for close coupling type. Pump shaft absolute concentricity and impeller excellent static and static balance for steady working. Hard alloy mechanical seal, no leakage. Low noise, small volume, single structure. It is easy ...
flow rate: 2-1500m3/h
head: 3-125m
material: cast iron or stainless steel
water supply pump: lift water pump
-
RY oil circulation pump
Oil circulation pumpThe hot oil pump is mainly used to transport weakly corrosive high temperature liquid without solid particles. The operating temperature is ≤ 350 ℃. It is an ideal hot oil circulating pump. The basic structure is a single-stage single suction cantilever foot support structure. The inlet of the pump is axial suction, and the outlet is vertically upward at the center. The pump is installed on the base together with the motor.The hot oil pump is supported by a double ended ball bearing. The front end is lubricated by lubricati...
flow rate: 3-1200m3/h
head: 5-125m
pump material: ductile iron, carbon steel, stainless steel
single stage end suction pump: high temperature 350 degree celsiusl centrifugal pump
-
water purification treatment pump
Water Treatment Pump/Water Purification PumpThe pump is vertical non-self- priming multistage centrifugal pump. It consists of a pump base and a pump head. The pressure-resistant cylinder and flow passage components are fixed between pump head and inlet and-outlet section with tie-bar bolts. the inlet and outlet are located at the pump bottom at the same plane (Inline type). The pump is used to convey various medium from tap water to industrial liquid at different temperature and with different flow rate and pressure. Convey non-corrosive...
flow rate: 1-150m3/h
head: 15-200m
pump material: SS304
centrifugal pump: circulation pump
-
Horizontal monoblock centrifugal pump
Horizontal monoblock centrifugal pump The pump can be made of cast iron, stainless steel, bronze etc. materials to convey different fluids/liquids The absolute concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation and absolutely no vibration. Hard alloy mechanical seal ensures no leakage in the transmission of different medium. The structure is compact, easy to maintain, and easy to replace seals and bearings. flow range: 1.5 ~ 2000m3 / h, lift range: 5 ~ 125m The pump can convey clean ...
flow rate: 1.5-2000m3/h
head: 5-125m
pump material: cast iron, stainless steel,bronze
centrifugal pump: water pump
-
Electric mechanical diaphragm metering dosing pump
Electric Mechanical diaphragm metering dosing pumpFeatures:1. The adjusting structure of the bone shaft is stable and reliable, and the service life is longer.2. For oil immersion lubrication, only the lubricating oil needs to be changed regularly, and the lubrication system does not need special maintenance.3. Reliable flow regulating mechanism, which can easily adjust the flow when the equipment is running or stopped.4. High strength polytetrafluoroethylene membrane is used, which is corrosion-resistant and has a long service life. It is suitab...
flow rate: 2-500L/H
pressure: 0-1.2MPA
pump material: PVC, PTFE, SS304,SS316
metering pump: dosing pump
-
Horizontal stainless steel centrifugal chemical pump
Stainless steel centrifugal chemical pumpCZ pump is a horizontal, single-stage and single-suction centrifugal pump, whose size and function conform to DIN24256/ISO2858 scale. The function scope of CZ chemical pump includes all the performances of IH series standard chemical pump, and its efficiency, cavitation performance and other indicators are better than IH pump. It is the ideal pump type for chemical and petrochemical industry, oil refinery, paper mill and pulp industry, grain industry and other fieldsHandle fluids:CZ pump Can t...
flow rate: 3-2000m3/h
head: 7-160m
pump material: SS304,SS316,SS316L,duplex stainless steel,alloy steel
centrifugal pump: chemical pump
-
NL Vertical submersible mud slurry pump
NL Vertical submerged slurry mud pump(1). Vertical slurry pump is single stage centrifugal pump, which consists of pump body, impeller, base, motor, etc. (2). Vertical slurry pump impeller adopts semi-open impeller (3 blades), which uses malleable cast iron, so strength is higher, corrosion resistance, and easy processing also with high efficiency.(3). In order to reduce the vertical slurry pump weight and reduce the amount of turning, the pump shaft is made of high-quality carbon steel.(4). Vertical slurry pump casing installed four oil seal to p...
flow rate: 25-250m3/h
head: 8-16m
pump material: ductile iron/cast iron
centrifugal pump: slurry pump
-
FRP self-priming seawater pump
Self-priming seawater pumpFRP material has its unique strong corrosion resistance, small friction resistance, high transport capacity, strong adaptability, simple construction method, easy maintenance etc. advantages. It has been widely used in the offshore oil platform in many systems.FRP pump can resist salt, acid, sea water etc. corrosion.SZ type fiberglass reinforced plastics corrosion resistant self-priming pump.The flow components for SZ fiberglass self priming pump are made of the modified phenolic fiberglass reinforced plastic materi...
flow rate: 2-100m3/h
head: 3-50m
pump material: FRP, fiberglass reinforced plastic
centrifugal pump: chemical pump
-
Stainless steel chemical process pump
CZ stainless steel chemical process pumpConveying low or high temperature liquid; Neutral or corrosive liquid; Liquids that are clean or contain solid particles.Suitable for: Chemical and petrochemical industriesFeaturesThe pressure acting on the shaft seal is balanced by a balance hole on the blade or impeller. The shaft seal can be made of soft filling seal (can be cooled or not cooled), and can also be made of single and double face non-balance mechanical seal of various structures. Ball bearings are durable and axle diameter is sufficient ...
flow rate: 2-1500m3/h
head: 3-125m
pump material: stainless steel, duplex steel
centrifugal pump: chemical pump
-
biogas pump
Biogas pumpsubmersible biosolid pumpHigh chromium alloy cutting impeller and cutter plateManure pit cutter submersible sewage pump is submersible motor pump with a cutter at the bottom of the inlet. When the pump works, the cutter combination device rotates with the shaft at high speed to produce a strong cutting force.The pump is used for used for pumping manure, biogas manure, sewage sludge, wastewater and similar media, some of which contain solids. Sanitary napkins, plastic bags, towels and hair is cut and then discharged along with the sewage....
flow rate: 10-200m3/h
head: 10-40m
pump material: high chrome alloy impeller and cutter plate
sewage pump: wastewater pump
-
GC Boiler feed water centrifugal pump
GC boiler feed water centrifugal pump/multistage horizontal pumpHorizontal single suction multistage segmented centrifugal pump is mainly used for boiler water supply, so also known as boiler water pump. This series of boiler feed pumps are suitable for conveying clean water with temperature lower than 110°C or other non-corrosive liquids with physical and chemical properties similar to water, which are widely used for boiler feed water of industrial and mining enterprises and public institutions and urban life water supply.The inlet and outlet ...
flow rate: 6-55m3/h
head: 46-450m
pump material: cast iron
centrifugal pump: multistage pump
-
DC motor diaphragm pump
12V/ 24V, DC motor diaphragm pumpPump body material: FRPPDiaphragm material: EPDM /NBRApplication:Reverse Osmosis water purification systemFilter separatorSpray equipmentGeneral Industrial EquipmentChemical meteringHygiene and pollution controlPrintingHousehold tap water pressurization, car washing, ship water desalination1. Low noise, corrosion resistance, high pressure, self-priming height of 5m.2. The medium temperature can reach 60℃.3. Dry operation is allowed.4. Built-in pressure switch to protect the pu...
flow rate: 1-12LPM
pressure: 0.24-0.9MPA
pump material: FRPP
diaphragm pump: membrane pump
-
Stainless steel magnetic pump with heating jacket
Stainless steel magnetic pump with heating jacketThe flow part is equipped with hollow jacket, and it can be used for steam, hot water, hot oil, as the conveying liquid and pump for multiple circulation, thermal insulation has a variety of ways to connect with the external thermal insulation system.The pump is Suitable to transport the chemical medium with solidification crystallization at normal temperature, the medium of the vaporization point need to cool, also the high and cold plateau region medium. Temperature: -80~+350℃ transport solution ...
flow rate: 2-200m3/h
head: 3-80m
pump material: SS304,SS316,SS316L
Magnetic pump: chemical pump
-
Stainless steel magnetic vortex pump
Stainless steel magnetic vortex industrial pump for alcohol, phenol, benzene etc. fluidsCWB series magnetic vortex pump is the use of permanent magnet magnetic transmission to realize non-contact transmission of torque as a new type of pump. The motor drives the outer rotor (that is, the outer magnetic steel) assembly rotates, through the role of magnetic field lines through the drive of sleeve inside the rotor (that is, the magnet steel) assembly and synchronous rotating with impeller, because the media is closed into the isolation sleeve inside, ...
flow rate: 0.12-5.4m3/h
head: 20-150m
pump material: SS304,SS316,SS316L
Magnetic pump: vortex pump
-
HFO heavy fuel oil transfer pump
Fuel oil transfer pump booster pump circulation pumpFuel oil can be diesel oil, petroleum, gasoline, kerosene etc. Centrifugal oil pump or gear oil pump or three screw pump and other pumps can transfer the fuel oil from one tank to the other tank with different flow rates, pressures and features. The pumps are driven by explosion-proof motor. The rotors such as impeller, gear etc. are made of bronze materials.Gear oil pump can be external gear oil pump, internal gear oil pump and circular-arc gear oil pump. Gear oil pump has compact size, low cost...
flow rate: 1-200m3/h
head: 0.3-2.5MPA
pump material: Brone gear pump,explosion-proof motor
gear pump: oil pump
-
alcohol explosion-proof self-priming magnetic pump
Alcohol explosion-proof self-priming magnetic pumpZCQ type alcohol pump, is a self-priming magnetic drive centrifugal pump. It is the use of the traditional permanent magnet coupling working principle of non-contact transmission torque improved pump. Alcohol transfer must require no leakage, self-priming, explosion-proof so on.The flow-through parts are made of stainless steel (304 or 316L) and widely used in petroleum, chemical, pharmaceutical, electroplating, environmental protection, water treatment, national defense and other departments. Th...
flow rate: 1-200m3/h
head: 3-50m
pump material: SS304,SS316,SS316L
centrifugal pump: self priming pump
-
automatic coupled submersible sewage pump
WQ Automatic coupled submersible sewage pumpThe automatic coupling installation system is mainly composed of fast interface, drainage base, guide rail, guide positioning bracket and so on. During installation, the pump body and the fast interface are closely connected by bolts. The drainage base is first fixed in the pool by anchor bolts. The fast interface drives the pump to slide down along the guide rail, and the drainage base is automatically coupled together through the automatic-coupling sealing surface. After installation, the pump bod...
flow rate: 2-1500m3/h
head: 3-50m
pump material: cast iron or stainless steel
centrifugal pump: sewage pump
-
CDL,CDLF boiler feed water pump
Boiler feed water pump /multistage centrifugal vertical pumpCDL/CDLF is a non-self-priming multistage centrifugal vertical pump driven by a standard electric motor. The motor shaft is directly connected with the pump shaft through the shaft coupling. The pull rod bolt is fixed between the pressure-resistant cylinder and the flow parts in the pump head and the inlet and outlet water section, and the inlet and outlet water section is in the same straight line at the bottom of the pump. Intelligent protector can be configured according to the n...
flow rate: 1-200m3/h
head: 5-260m
pump material: SS304 Stainless steel
centrifugal pump: multistage pump