Products List 2
-
RW AODD PUMP pneumatic double diaphragm pump
AODD PUMP, pneumatic diaphragm pumpAir operated double diaphragm pump uses compressed air as the power source and used to convey various corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids. Pump body material can be plastic, aluminum alloy, cast iron, stainless steel etc. and diaphragm materials can be Santoprene, nitrile rubber, neoprene ,viton, Teflon etc according to the pumped liquids.The pump has self-priming function. It can idle and can submersible for working. The fluid conveyed i...
flow rate: 1-100m3/h
head: 0.8MPA
diaphragm pump: air operated pump
pneumatic pump: membrane pump
-
GNWQ cutter sewage pump
Alloy cutter sewage pumpVortex impeller, high chrome alloy cutter (48HR) with strong cutting force. Thermal protection device is built in. The sewage submersible pump can cut the long fiber, plastic , paper ,belt, cloth strip, straw, rope, sanitary napkin, diapers, small branches and other debris in the sewage and then discharge them.The pump shall be installed and used at a height of 25 cm from the bottom of the pool to prevent accidents and avoid people from being in the same pool with the pump (it can be equipped with a control cabinet to remot...
flow rate: 10-200m3/h
head: 10-35m
pump material: cast iron pump body, alloy steel impeller, high chrome alloy cutter
sewage pump: wastewater pump
-
RV dosing screw pump
Metering dosing screw pumpRV series minitype dosing screw pump is a kind of single screw pump, which is a positive displacement pump.When the single-screw rotor rotates around the stator axis in the double-screw stator hole, the closed cavity formed between the rotor and the stator is continuous, uniform, and the volume is constant to transport the medium from the suction end to the output end.Features1 - The RV series minitype screw pump is specially designed for small flow liquid transportation, which can transport materials with good fluidity ...
flow rate: 20-200LPH
head: 0.6-2.4MPA
dosing screw pump: positive displacement
rotor pump: single screw pump
-
WFB No-leakage vertical self-priming pump
No leakage vertical self-priming pumpFeatures:1. The pump adopts no leakage seal device of dynamic seal and auxiliary seal to replace the packing seal or mechanical seal. The sealing device has no friction and wear, and its service life is more than 10 times longer than that of traditional seals. It is the ideal pump to replace submerged pump, submersible pump, submersible sewage pump etc. 2. According to the principle of vacuum pump, the pump adopts electric air control valve for self-priming. Self-priming performance i...
flow rate: 2-1500m3/h
head: 5-80m
pump material: cast iron, stainless steel, aluminum alloy, PP plastic
industrial centrifugal pump: self priming vertical pump
-
WRY hot oil circulation pump up 350 degree celsius
WRY Hot oil circulation pumpWRY series hot oil /thermal oil circulation pump has been used in the carrier heating system in China, and has entered various industrial fields such as petroleum, rubber, resin, textile, printing, construction, road construction, machinery, etc.. WRY hot oil pump is mainly used to transport weakly corrosive high-temperature liquid without solid particles, and the service temperature is no higher than 350 degree Celsius.model descriptionWRY 100-65-230WRY: water-free cooling hot oil pump100: pump inlet diamete...
flow rate: 4-1000m3/h
head: 15-85m
pump material: cast iron or stainless steel
centrifugal oil pump: thermal oil transfer pump
-
IHF fluoroplastic liner chemical centrifugal pump for acids unloading
Chemical centrifugal pump for acids unloadingIHF single-stage single-suction steel-lined fluoroplastic, polypropylene and other chemical centrifugal pumps (IHF centrifugal pumps for short) are designed according to international standards and combined with the process of non-metallic pumps, and manufactured with tortoiseshell mesh lining technology. Compared with other similar pumps, IHF centrifugal pumps have the advantages of anti-falling and anti-cracking lining. The pump body is made of metal shell lined with polytetrafluoroethylene propy...
flow rate: 2-400m3/h
head: 3-80m
pump material: fluorine plastic FEP/F46
chemical acid transfer pump: centrifugal acid circulation pump
-
Submersible sludge sewage drainage pump
Submersible sludge pumps drainage sewage pump with easeThe pump is submersible and it is located below the fluid level, which eliminates the risk of cavitation and dry running. Submersible sludge pump is suitable for pumping dirty water and water mixed with solids particle or long fiber etc. And no clogging.Automatic coupling installation system or Mobile installation systemIt is applicable to the transportation of granular sewage and dirty water in chemical, petroleum, pharmaceutical, mining, paper industry, cement plant, steel making plant, powe...
flow rate: 2-1500m3/h
head: 3-50m
pump material: cast iron or stainless steel, high chrome alloy
sewage pump: wastewater pump
-
Multistage centrifugal horizontal water /oil /chemical pump
Multistage Centrifugal Horizontal Water /oil /Chemical PumpHorizontal single-suction multistage segmented centrifugal pump. High efficiency and energy saving, wide performance range, safe and stable operation, low noise, long service life, convenient installation, and maintenance. It can transport clean water without solid particles (abrasive), without suspended solids or other liquids with physical and chemical properties similar to that of clean water. It can also be used to transport hot water, oil, corrosive or abrasive fluid media by chang...
flow rate: 2-500m3/h
head: 12-600m
pump material: cast iron, cast steel and stainless steel
multistage horizontal centrifugal water pump: multistage centrifugal oil pump
-
Fuel oil circulation gear pump
Fuel oil / lubricant oil circulation pumpYCB Series circle arc gear oil pump is suitable to transfer various lubricant oils and other liquids similar to lubricant oils without solid grain and fiber and oil viscosity is 5-1500CST. Pump material: cast iron/steel (For oils which temperatures are not higher than 80 degree celsius) and stainless steel (For oils which temperatures are not higher than 200 degree celsius and corrosive liquids and drinks and oils etc without lubricant. And stainless steel pump with bronze gears can be used for liqui...
flow rate: 2-60m3/h
pressure: 0.6-2.5MPA
pump material: cast iron or stainless steel
gear pump: OIL PUMP
-
Multistage feed water pumps
Vertical Multistage Feed water pumpsCDL/CDLF vertical stainless steel light type multistage centrifugal pump can transport various media from tap water to industrial liquid, and it is suitable for different temperature, flow and pressure ranges, as well as slightly corrosive liquids. CDL is applicable to non-corrosive liquids and CDLF is applicable to slightly corrosive liquids. CDL pump is with cast iron pedestal (inlet and outlet base) and CDLF pump is with stainless steel pedestal (inlet and outlet body).Water supply: filtrati...
flow rate: 2-200m3/h
head: 8-400m
pump material: SS304
Feed water pump: supply water pump
-
high chromium alloy slurry pump
A49 High chromium alloy slurry pumpZJ type pump is a single stage single suction centrifugal slurry pump. The pump body adopts a double shell structure inside and outside. The pump shell is vertically split. As required, the water outlet position of the pump can be rotated at an interval of 45 degrees for 8 different angles for installation and use. This series of products are characterized by high efficiency, energy saving, low vibration, low noise, reliable operation, long service life, and convenient maintenance. It can be widely used in powe...
flow rate: 4-1800m3/h
head: 8-125m
pump material: high chromium alloy
centrifugal slurry pump: horizontal single stage pump
-
double-channel submersible pump for sewage water
Single or Double-channel Submersible pump for sewage waterpump body, single/ double-channel type impeller, motor shaft etc. are made of stainless-steel material. Double mechanical sealsSubmersible pumps are suitable for draining dirty water or sewage in domestic and civil applications. The pumps are equipped with single or double-channel impeller and capable of pumping liquids containing fiber, suspended solids. They are ideal for pumping sewage water, wastewater, surface water and water mixed with mud etc.
flow rate: 2-1500m3/h
head: 3-50m
pump material: SS304,SS316,SS316L
sewage drainage pump: wastewater drain pump
-
CZ Stainless steel chemical process pump open or close impeller mechanical seal
Stainless steel Chemical process pumpCZ series standard chemical pump is a horizontal, single-stage, single suction centrifugal pump; Its size and performance comply with DIN24,256/ISO2858 standard.The performance range of CZ series standardized chemical pump covers all the performances of IH series standardized chemical pump. Its efficiency, cavitation performance and other indicators exceed IH type pump, which can be interchanged with IH type pump.Operating temperature: - 80 to 300 degree CelsiusFlow: 6m3/h to 600m3/hLift: 3m t...
flow rate: 2-1500m3/h
head: 3-80m
pump material: stainless steel ,duplex stainless steel, titanium alloy
transfer circulation pump: stainless steel centrifugal pump
-
end suction pump
End suction centrifugal pumpAn end suction pump is a type of centrifugal pump which has a casing with horizontal suction inlet and vertical discharge outlet. They are almost for single stage pumps which have only one impeller and impeller is cantilevered on one of the shaft.End suction pumps can be used for any transfer or circulation of liquid and are capable of handling clean or dirty liquids and liquids with low viscosity. They are available in a wide variety of material combinations to suit any application.When the liquid enters the pump, it mo...
flow rate: 2-400m3/h
head: 5-80m
pump material: cast iron or stainless steel
centrifugal single stage pump: end suction centrifugal pump
-
Cutter sewage sump non-clogging pump
GNWQ cutting sewage pump.Its cutting part has a unique spiral structure (vortex impeller) and a sharp knife edge design (cutter ring/plate).The material is Rockwell hardness 48HR or above (HRC49-52).Cutter ring has the good cutting ability to cut the straw, cotton, cloth, baby diapers and other wastes and then be discharged out.Product material, operation mode and efficiency comparison with conventional productspump body is HT250 cast iron;Cutting part is made of alloy with Rockwell hardness above 48HR rubber and plastic oil resistant...
flow rate: 10-300m3/h
head: 10-20m
pump material: cast iron
sump sewage pump: non-clogging sewage pump
-
JBB Series electric mechanical diaphragm metering dosing pump for chemical fluids
The hydraulic end of JBB series mechanical diaphragm metering pump uses the diaphragm to form a working chamber, and the reciprocating motion of the piston (plunger) is replaced by the periodic deformation of the diaphragm, which is called the mechanical diaphragm metering pump.characteristic:1 - No dynamic seal and leakage.Because the static seal of the diaphragm at the hydraulic end replaces the dynamic seal of the piston, it can ensure no leakage when transporting media;2 - In addition to clean water, it is more suitable for conveying flammable...
flow rate: 0-130L/H
pressure: 0-1MPA
pump material: SS304, SS316, PVC, PTFE
chemical dosing pump: mechanical diaphragm pump
-
Chemical centrifugal pump with hea preservation jacket to convey melting urea solution
IN melting urea pump is a single - stage single - suction cantilever centrifugal pump. It is suitable for conveying melted urea liquid in fertilizer plant, and it can also be used for conveying other corrosive liquids without suspended particulate matter. Medium temperature allows -20 to 150 degrees Celsius, the pump is horizontal suction, radial top discharge out, the front side of the pump has heat preservation jacket, double protection jackets can allow 0.59MPa,150 degrees Celsius steam heat preservation. Users can choose different mate...
flow rate: 2-400m3/h
head: 3-125m
pump material: SS304,SS316,SS316L
heat jacket pump: cooling pump
-
2BV Single stage liquid ring vacuum pump with flange or threaded suction and exhaust port
Liquid ring vacuum pump with flange or threaded end for suction and exhaust2BV series liquid ring vacuum pump is suitable for suction gas and vapour ,and the suction pressure can reach 33mbar (97% vacuum degree ).When the liquid ring vacuum pump works under the condition that the suction pressure is near the limited vacuum (saturated pressure of the operating liquid )for a long time ,it should couple with the cavitation protection pipe in order to protect the pump .When it is used as a compressor ,the maximum pressure is 0.26mpa.As a new generation...
Suction capacity: 27-500m3/h
pressure: 0.097MPA
pump material: cast iron or stainless steel
Vacuum pump: single stage vacuum pump
-
QY Self-priming gas-liquid vortex pump
Self-priming gas-liquid mixing pumpThe suction inlet of the gas-liquid mixture pump can use the negative pressure action to inhale the gas, without the use of air compressor and atmospheric ejector.The high speed rotating impeller of the pump mixes the liquid and the gas, without stirrer and mixer.Due to the pressurized mixing in the pump, the gas and liquid are fully dissolved, and the dissolution efficiency can reach 80-100%.Highly soluble solutions can be produced without large pressurized dissolved gas tanks or expensive reaction towers.The gas...
flow rate: 1-12m3/h
head: 40-50m
pump material: Stainless steel
vortex pump: pressurization pump
-
Oil suction extraction pump
Electromechanical oil drum pumpOil drum pump is widely used in various industries in the barrel of liquid materials to suck all kinds of non-impurities non-viscosity liquid such as diesel oil, kerosene, pure based fuel oil Stainless steel pump driven by explosion-proof motor EXDIIBT4 can suck gasoline, alcohol, methanol xylene and other medium. Pump body material is divided into aluminum alloy ,stainless steelSuitable for industrial and mining enterprises, oil stores, chemical reagent addition, oil depot and other places to transport genera...
flow rate: 100-150lpm
head: 8-11m
pump material: aluminum alloy, stainless steel, RPP
centrifugal oil pump: oil extraction pump