Products List 23
-
N Condensate water pump
N type Condensate water pump is used for conveying condensate water with temperature less than 120℃ or other liquid with physical and chemical properties similar to clear water.NB, NBA type pumps are used for condensate water in condensers with temperature less than 80℃ or condensate water from 750-3000 kw steam turbine generator sets and other similar occasions.Performance range:Flow (Q): 10-100m3/hHead(H): 12-141mN type condensate water pump3 n6x23 -- the inlet diameter of the pump is 3 inchesN -- horizontal cantilever condensing pump6 ...
flow rate: 2-200m3/h
head: 3-125m
pump material: casted steel or stainless steel
centrifugal pump: transfer pump
-
IN jacket heat preservation chemical pump
IN series jacketed stainless steel heat preservation pump， steam heat preservation pump, corrosion resistance and crystallization resistance chemical pumpIN Series new fused/melt urea pump is a single stage single suction Cantilever centrifugal pump.The pump is Suitable for conveying melting urea liquid in chemical fertilizer plant and other corrosive liquid without suspended particulate matter. The temperature of the medium is allowed -20~180 degrees Celsius. The pump is horizontal suction, radial top spit out and the front side of the pump ...
flow rate: 2-400m3/h
Head: 3-125m
pump material: stainless steel
centrifugal pump: chemical pump
-
CYZ Self priming explosion proof centrifugal oil pump
CYZ Self priming explosion proof oil centrifugal pump is normally made of cast iron pump case with bronze impeller and driven by explosion proof motor.CYZ self-priming centrifugal pump is according to the relevant technical data at home and abroad after digestion, absorption, improve the development of the latest pump products, this pump is suitable for the oil industry, oil depot, oil tank truck land ideal products, and is suitable for the Marine cargo pump, bilge pump, ballast pump and machine cooling water circulation and so on, respectively t...
flow rate: 2-500m3/h
Head: 5-80m
pump material: cast iron or stainless steel,bronze impeller
self priming pump: oil pump
-
SP chemical industry mixed flow pump
SP chemical industry mixed flow pumpSP chemical mixed flow pump can be economical and effective delivery of large flow with low head. It is used to convey the chemical neutral or corrosive liquids containing certain particles.Performance rangeFlow: Q up to 7000m3/hHead: H up to 25mWorking pressure: P up to 0.6mpaOperating temperature: t-20~+120℃Pump applicationforced circulation in chemical processmaricultureurban gas engineeringwater treatment systemPump characteristicsHigh pump efficiency, low energy consumption.Pump can work in the p...
flow rate: 300-2000m3/h
Head: 5-28m
pump material: stainless steel
chemical pump: corrosion resistant pump
-
TLB chemical centrifugla desulphurization pump
TLB chemical desulphurization centrifugal pumpTLB series desulphurization pump is a new type, high efficiency, single stage single suction horizontal centrifugal pump developed by our company based on the advanced technology from abroad and the actual situation of domestic desulphurization industry.Main advantages:wide applicationLong sealing lifeWear resistance, corrosion resistance, non cloggingApplicable industries: flue gas desulfurization (wet limestone/gypsum desulfurization, double alkali desulfurization, circulating fluidized bed desulf...
flow rate: 2-3000m3/h
Head: 3-125m
pump material: duplex stainless steel (grade: 2205;2507;2605;Cr30A;CD4MCu)
centrifugal pump: chemical pump
-
RGB industrial hose peristaltic pump
RGB Hose pump belongs to the peristaltic pump category. Peristaltic pump is a type of rotor positive displacement pump, because its working principle is similar to the digestive tract by peristaltic transport of gas, solid, liquid three-phase medium named. The peristaltic pump is used to deliver a highly abrasive medium. It has no valve, no seal, and the contact part with the media is the inner cavity of the rubber hose, the compression hose rotor is completely independent of the media. Hose pump unique: good self-priming capacity, almost it can ...
flow rate: 2-100m3/h
Head: 60m
pump material: fluoroplastic liner
hose pump: peristaltic pump
-
YW,YWP semi-submerged non clogging sewage pump
YW Semi-submersible not clogging sewage pumpYW Semi-submersible sewage pump is made of cast iron or stainless-steel material with single tube or double tube. The motor is above the liquid level and the pump bracket is mounted onto the liquid level and the working part of pump body is under liquid. The pump has the impeller of single flow channel or large flow double channels and volute to have the strong sewage discharge. The mechanical seal is for the special wear resistant double ends seals and have the long life.YW semi-submerge...
flow rate: 2-1500m3/h
Head: 3-60m
pump material: cast iron or stainless steel
submerged pump: submersible pump
-
S gear oil pump
S gear oil pumpS Series gear oil pump is suitable to transport the neuter oil whose viscosity is from 5 to 1000 cst and temperature is below 60 degree celsius and without solid grain. It is widely used to transport the machine oil and kerosene and diesel oil and various vegetable oil and other similar liquids in oil station and commerce and grain and foodstuff supply center.S Series spray oil pump is suitable to transport and spray the heavy oil and diesel oil etc fuel oil whose viscosity is from 5 to 1000 cst and temperature is below 100 degree ce...
flow rate: 10-125L/MIN
Head: 15m
pump material: stainless steel
gear pump: oil pump
-
CQCQ Magnetic driving gear pump
CQCB stainless steel magnetic gear pump adopts high quality stainless steel 304 or 316 pump shell and PEEK gear, filled with polyfluoroethylene corrosion resistant materials with precision manufacturing and processing. The gear is made of fluoroplastic, with simple structure, beautiful appearance, low noise, stable pressure, exact flow, self-priming, and non-leakage sealing structure design. Driven by magnetic coupling shaft, it can ensure the safe conveying of fluid.CQCB stainless steel magnetic gear pump can be used for sampling, pharmace...
flow rate: 8-50L/MIN
head: 2.5MPa
pump material: stainless steel
gear pump: magnetic drive pump
-
HCLF Vertical fluorine lined magnetic drive pipeline pump
HCLF Vertical pipeline fluorine-lined magnetic pumpNo leakage fluorine-lined magnetic pipeline vertical pump (hereinafter referred to as: Magnetic pipeline pump) is the application of modern magnetics principles, use of permanent magnet magnetic transmission to realize non-contact transmission of torque of a new type of pump, which is outside the motor to drive the rotor (that is, the outer magnetic steel) assembly rotates, through the role of magnetic field lines passing isolation sleeve inside the rotor (that is, the magnet steel) assembly and s...
flow rate: 2-200m3/h
head: 2-35m
pump material: fluoroplastic liner
centrifugal pump: chemical pump
-
VSP Strong vacuum self priming pump
VSP Strong vacuum self-priming pump:The VSP self-priming pump is mainly composed of the pump body, pump cover, the rotor assembly and the power assembly. The rotor assembly is installed in the pump chamber composed of the pump body and the pump cover. The power assembly drives the rotor assembly to rotate. Its advantage is strong self-priming performance. The suction height is up 8.2 meters, far higher than other self-priming pump (3 to 4 meters suction range).The viscosity of pumped liquids is with wide range. VSP Strong vacuum se...
flow rate: 2-200m3/h
head: 2-40m
pump material: stainless steel, fluoroplastic
self priming pump: chemical pump
-
HW horizontal mixed flow pump
HW mixed flow pump:Mixed flow pump is a kind of pump between centrifugal pump and axial flow pump. Specific speed of mixed flow pump is higher than the centrifugal pump and lower than the axial flow pump. It is generally between 300-500.Its head is higher than the axial flow pump, but the flow is smaller than the axial flow pump and larger than the centrifugal pump.When electric motor drives the impeller to rotate, the role of the liquid has both centrifugal force and axial thrust (it is the combination of centrifugal pump and axial pump, the liqu...
flow rate: 70-7200m3/h
head: 5-15m
pump material: cast iron or stainless steel
mixed flow pump: irrigation pump
-
HCY Magnetic drive submerged pump
HCY no leakage magnetic drive submerged pump is for the submerged pump to prevent leakage in the process of conveying medium and with totally enclosed structure. All the parts which contact liquids are all made of stainless steel and the submerged depth range of 1 to 6 meters. The main parts of the pumps are submerged into the liquid. The pump adopts the static seal, without the traditional mechanical seal. The medium can be completely isolated from the outside air so as to achieve no leakage.HCY magnetic drive submerged pump is especially suit...
flow rate: 2-200m3/h
head: 15-120m
pump material: stainless steel
submerged pump: submersible pump
-
DLY Vertical submerged multistage oil pump
DLY Vertical submerged multistage oil pumpDLY submerged multistage pump is a new type of oil collecting pump in oilfields. The pump covers the small area and facilitate the field installation and have the convenient maintenance and operation. DLY submerged multistage pumps can fully meet the needs of oil collection and discharge of dirty oil and sewage etc.DLY submerged multi-stage pump is used for conveying oil and oil-water mixed medium collected by oil well and oil station. It is also suitable for oil pipeline. It can meet the requirem...
flow rate: 6-150m3/h
Head: 15-250m
pump material: ductile iron ,cast iron, stainless steel
multistage pump: centrifugal pump
-
JXF fluoroplastic liner axial flow pump
JXF Fluoroplastic liner axial flowThe flow parts of the pump are made of PFA material with high quality. JXF fluoroplastic liner axial flow is highly adaptable to corrosive liquids such as nitric acid, sulfuric acid, hydrochloric acid, phosphoric acid and strong oxidizer. The pump has the good corrosion resistant for the corrosive liquids. Its corrosion resistance is far better than high nickel alloy, no. 20 alloy, even more than high silicon cast iron etc.Excellent wear resistanceThe pump adopts a special process of drying and pressing, i...
flow rate: 300-8000m3/h
head: 2-7m
pump material: fluoroplastic liner
chemical pump: transfer pump
-
FJX axial flow circulation pump
FJX forced circulation axial pumpsFJX series forced circulation pump is for the axial flow pump with high flow and low head. FJX type forced circulation pump adopts international standard manufacturing with high efficiency, energy saving and convenient maintenance etc.FJX forced circulation axial pumps is used for membrane caustic soda, phosphoric acid, sugar, molten salt, paper, wastewater and other industries evaporation, concentration and cooling etc. In order to improve the production capacity of equipment, increase the heat transfer coe...
flow rate: 300-23000m3/h
head: 2-7m
pump material: stainless steel
circulation pump: transfer pump
-
FUH engineering plastic UHMWPE chemical transfer pump
Product overview:FUH series engineering plastic pumps are horizontal, single stage, single suction, bracket type centrifugal pumps. The flow parts of FUH pump are made of ultra high molecular weight polyethylene (UHMWPE), which has excellent corrosion resistance, excellent wear resistance (ranking first among all kinds of plastics) and strong impact resistance.Product features:FUH series engineering plastic pump seal adopts mechanical seal, dynamic seal and packing seal etc and can transport acid and alkali solution and can also transpo...
flow rate: 2-200m3/h
head: 3-50m
pump material: Plastic liner (PP, F46, UHMWPE etc)
centrifugal pump: chemical pump
-
HFM back suction corrosion resistant press filter pump
HFM series back suction corrosion and wear resistant pressure filter pump has the unique structure. The sealing life is 2 to 3 times as the similar pumps, especially with pressure conveying condition(filter press equipment or with pressure spray circulation pump). The advantage of sealing is particularly obvious. Under high pressure conditions, the wear resistance is better than the conventional pump. Because of the two-stage pressure, the impeller linear velocity of the slurry pump is between 22~28 m/s, so the outlet pressure of 0.8~1MPa can be...
flow rate: 2-200m3/h
head: 3-50m
pump material: Plastic liner (PP, F46, UHMWPE etc)
centrifugal pump: chemical pump
-
CQW magnetic drive vortex pump
CQW magnetic vortex pumpCQW type magnetic drive vortex pump adopts magnetic drive structure to ensure the pump can be absolutely sealed for no leakage. CQW magnetic drive vortex pump is used to transfer corrosive, flammable, explosive, highly toxic and other chemical media1. High head, small flow, and the specific revolution is generally less than 40;2. Simple structure, small volume and light weight;3. CQW magnetic drive vortex pump has self-lubrication loop to improve the service life of sliding bearing;4. Set up a cooling loop to take a...
flow rate: 0.7-15m/h
head: 20-120
pump material: stainless steel
magnetic pump: vortex pump
-
QBK cast iron lined with fluoroplastic pneumatic diaphragm pump
QBK cast iron lined with fluoroplastic pneumatic diaphragm pump is used to transfer the chemical acid,alkali,solvent etc. The pump is driven by compressed air so the pump is especial for flammable, explosive conditions. The pump has the self priming performance and suction height is up 5meters. It can pump the liquids and other medium which is not easy to flQBK cast iron lined with fluoroplastic pneumatic diaphragm pump is used to transfer the chemical acid,alkali,solvent etc. The pump is driven by compressed air so the pump is especial for f...
Flow rate: 0-60m3/h
Head: 0-70m
pump material: Cast iron lined with F46
diaphragm pump: membrane pump