Products List 21
-
ZLB Vertical axial flow water pump
ZLB vertical axial flow pump is a single-stage vertical axial flow pump. ZLB vertical axial flow pump is suitable for pumping water, sewage, rainwater and slightly corrosive liquid and the temperature of the liquid is not higher than 50℃.ZLB vertical axial flow pump has the feature of large flow and low head. ZLB pump can be used in irrigation, irrigation, water conservancy projects, urban water supply, drainage and sewage treatment, power plants, salt plants and farms circulating water, dock lifting water level and it can also be used in me...
flow rate: 1100-3000m3/h
head: 3-7m
pump material: cast iron or stainless steel
water pump: drainage pump
-
JYWQ automatic stir sewage submersible pump
JYWQ series automatic stir sewage pump is on the basis of the general sewage pump and adopts automatic mixing device. The mixing device rotates with the motor shaft and has extremely strong stirring power. Sediment into sewage is mixed into suspension and sucked by the pump and finally discharged. It improves the pump to collect, drainage capacity so as to complete a one-time drainage, sewage disposal, in addition to the deposition and save operating costs. The pump has the obvious advancement and use as environmental protection pump.Featu...
flow rate: 2-600m3/h
head: 3-60m
pump material: cast iron or stainless steel
centrifugal pump: submersible pump
-
PN horizontal single stage mud pump
PN, PNL mud pump belongs to the single-stage single-suction centrifugal pump, it can transport the liquids with solid particle and heavy mud with the proportion of up to 50%. The flow components of the pump is made of wear-resistant cast iron. PN,PNL mud pump is suitable to transport mud, sand liquid and etc. on mining, metallurgy, construction industry. PNL slurry pump is a single-stage vertical mud pump and PN is for horizontal slurry pump. PN,PNL slurry pump is suitable for conveying liquid containing solid particles. ...
flow rate: 5-1500m3/h
head: 14-90m
pump material: cast iron or stainless steel
centrifugal pump: mud pump
-
CHLF light duty stainless steel multistage centrifugal horizontal pump
CHLF type light duty stainless steel stage multi-stage centrifugal pumpCHL, CHLK and CHLF (T) light duty horizontal multistage stainless-steel centrifugal pumps are provided with a repair-free mechanical seal. The flow parts of the pump are made of stainless steel (304 or 316), with low noise, light corrosion resistance, beautiful appearance, small volume, light weight, long service life and other characteristics.Application scope of CHLF type light-duty multi-stage stainless steel centrifugal pumpCHL, CHLK and CHLF (T) ...
flow rate: 1-20m3/h
head: 2-50m
pump material: stainless steel
centrifugal pump: multistage pump
-
ISWD horizontal pipeline low rotary speed centrifugal pump
ISWD horizontal pipeline low rotary speed centrifugal pumpISWD horizontal pipeline centrifugal pump (horizontal low rotary speed single-stage circulating pump) ISWD horizontal low speed pipeline pump is driven by motor with low rotary speed. The pump can run more reliable and steadily. It is manufactured at the base of ISW type centrifugal pumpAccording to the working temperature, different medium, ISWD horizontal pipeline low rotary speed centrifugal pump is used to transfer cold water, hot water, high temperature or corrosive chem...
flow rate: 2-1500m3/h
head: 3-80m
pump material: cast iron or stainless steel
centrifugal pump: transfer pump
-
ISGD Vertical pipeline low rotary speed centrifugal pump
ISGD Vertical pipeline low rotary speed centrifugal pumpISGD vertical pipeline low speed centrifugal pump is manufactured on the base of ISG and IS centrifugal pump. ISGD vertical pipeline low speed centrifugal pump is equipped with low speed motor so as to greatly reduce the noise of running and prolong the service life of wearing parts.ISGD vertical pipeline low speed centrifugal pump is suitable for air conditioning circulation and heating circulating and booster of circulating system. ISGD vertical pipeline centrifugal pump ...
flow rate: 2-1500m3/h
head: 3-125m
pump material: cast iron or stainless steel
centrifugal pump: transfer pump
-
IHF fluoroplastic liner anticorrosion centrifugal pump
IHF fluoroplastic liner chemical centrifugal anticorrosion pumpIHF fluoroplastic liner centrifugal pump is also called as plastic chemical centrifugal pump. The connection type between the pump and motor can be shaft coupling type or closed couple.The pump body is made of metal shell lined with polyfluorinated ethylene propylene (F46) to enhance the pressure resistance of the pump and good corrosion resistance.The parts in contact with fluids such as pump cover, impeller are all sintered and pressed with metal inserts of fluorinated plastics (F...
flow rate: 2-200m3/h
head: 3-80m
pump material: FEP,F46
centrifugal pump: chemical pump
-
ZWL direct-coupled self priming sewage drainage pump
ZWL direct-coupled self priming non clogging sewage drainage pumpZWL type direct-coupled self-priming sewage pump is a new structure pump developed on the base of ZW self priming sewage pump. The pump has the performance of self-priming and non-clogged sewage drainage and is directed coupled to the motor.Self priming structure is for the axial back mixing type and through the unique design of the pump body and impeller flow channel.The pump can be like general self-priming centrifugal pump. It does not need to install the bottom valve a...
flow rate: 3-800m3/h
head: 5-80m
pump material: cast iron or stainless steel
centrifugal pump: self priming pump
-
BQW explosion proof submersible sewage drainage pump
BQW explosion-proof mine submersible sewage drainage pumpBQW explosion-proof submersible sewage pump is designed and manufactured in accordance with the flameproof standard. In the motor part, strict flameproof measures are adopted. The motor housing is made of cast steel, the rotor shaft is made of stainless steel. The unit can drain the shallow water on the surface of the working face and also work under the water for a long time. Electric pump is with compact structure, light and small easy to move, without water diversion, double-sided seal...
flow rate: 2-1500m3/h
head: 3-60m
pump material: cast iron or stainless steel
centrifugal pump: submersible pump
-
YG Vertical explosion proof centrifugal pipeline oil pump
YG Vertical pipeline centrifugal oil pumpYG type vertical pipeline centrifugal oil pump (referred to as pipeline pump) is a derivative of ISG type vertical pipeline centrifugal pump. This type of pumps are driven by explosion-proof motor (default explosive-proof grade d Ⅱ BT4) and with bronze impellers. The pump can transport light oils such as gasoline, kerosene, diesel oil etc. petroleum product without solid particles (abrasive matter). And the temperature of medium delivered is from - 20 ℃ to + 120 ℃.Features:1. The pump is a ...
flow rate: 2-1500m3/h
head: 5-125m
pump material: cast iron case with bronze impeller
centrifugal pump: oil pump
-
DF horizontal stainless steel multistage chemical centrifugal pump
DF horizontal stainless steel multistage chemical pumpDF horizontal multistage pump is made of stainless steel material and is used to transport the corrosive liquids with temperature of -20 to 150℃, without solid particles. The inlet pressure of the pump is less than 0.6mpa.DF multistage pump is horizontal, single suction, multi - stage centrifugal pump. The outlet and inlet of the pump are vertically upward, and the suction section, middle section and spit section of the pump are connected together with tension bolts. Pump rotor is installed ...
flow rate: 15-600m3/h
head: 15-700m
pump material: stainless steel
centrifugal pump: multistage pump
-
HH heavy duty slurry horizontal centrifugal pump
HH heavy duty slurry horizontal centrifugal pump:HH slurry pump is for cantilever horizontal centrifugal slurry pump.It is suitable for conveying strong abrasion and high concentration slurryin metallurgical, mining, coal, power, building materials and other industrial sectors.The pump has a high lift and a long distance and it can also be used in series.Seal of HH slurry pump seal can be for packing seal or centrifugal seal.Pump outlet can be required by 45¡ã interval, rotating eight different angles of installation.PumpMax.power(KW)Mat...
flow rate: 15-1000m3/h
head: 12-118m
pump material: high chrome alloy
centrifugal pump: slurry pump
-
WL LW Vertical not clogging sewage pump
LW (WL) vertical sewage pump is a single suction volute type pump. The pump is equipped with a single (double) large flow passage impeller of non blocking and anti winding type, which has a good passing capacity. There are two types of structure. One is that the motor is directly coaxial with the pump, the other is that the shaft coupling is used for connection, and the motor is standard vertical motor. Each structure has two connection forms: one is horizontal suction at the inlet, with corner function. According to the use requiremen...
Flow: 2-1500m3/h
head: 3-60m
pump material: cast iron or stainless steel
sewage pump: centrifugal pump
-
2CY Gear oil transfer pump
2CY series gear pump 2CY series gear pump is suitable for conveying lubricating oil (without solid particles and fibers, without corrosion) or other liquids with similar properties, as well as for hydraulic rotation system. Liquid temperature is not higher than 80 DegC and viscosity is from 5-1500cst.Application scope of 2CY series gear pumpIt can be used as transmission and booster pump in oil transportation system;In the fuel system, it can be used as a fuel pump for conveying, pressurizing and injecting;In the hydraulic transmi...
Flow: 1-100m3/h
head: 250m
pump material: cast iron or stainless steel
gear pump: oil pump
-
1-1B thick slurry screw pump
1-1B thick slurry screw pump1-1B thick slurry Screw pump is a single screw conveying pump, its main working parts are eccentric screw (rotor) and the inner surface of the double helix screw bushing (stator).Its working principle is that when electric pump shaft rotates, screw is around the axis of rotation itself on the one hand, on the other hand it rolls along the bushing inside surface. 1-1B thick slurry screw pump is single screw displacement rotary pump. The pump uses eccentric screw in twin twist of the single screw bushing in the rotation, t...
flow rate: 1-40m3/h
head: 60-120m
pump material: cast iron or stainless steel
screw pump: slurry pump
-
DBY electric operated double diaphragm pump
DBY electric operated double diaphragm pump:DBY series electric diaphragm pumps are driven by cycloid reducer, and the double diaphragm is driven by crankshaft slider mechanism for reciprocating movement, which makes the working chamber volume change alternately to achieve continuous suction and discharge of liquid. DBY electric diaphragm pump is more and more widely replaced some of the centrifugal pump, screw pump to be used in petrochemical, ceramics, metallurgy and other industries.Features:1. No irrigation and water diversion is required,...
flow rate: 0-60m3/h
head: 0-40m
pump material: cast iron or stainless steel
diaphragm pump: membrane pump
-
WFB Self control self priming vertical chemical centrifugal pump
WFB self control self priming vertical centrifugal pumpWFB series self control vertical self priming pump without seal is a new product developed by introducing advanced technology from abroad. The pump is suitable for conveying liquid containing solid particles, oily sewage and various liquids that are not easy to produce foam. It realizes "one-time adding guiding water and lifelong self-absorption". According to different conveying medium, it can be made of stainless steel, reinforced polypropylene, carbon steel, cast iron and other ...
flow rate: 3-1500m3/h
head: 3-125m
pump material: cast iron or stainless steel, PP
centrifugal pump: chemical pump
-
FPZ corrosion resistant self priming plastic pump
FPZ corrosion resistant self priming centrifugal plastic pumpFPZ series corrosion resistant self-priming pump is applicable to -40℃ ~ +120℃ (PVDF) and -40℃ ~ +80℃(RPP) all kinds of corrosive medium transportation. FPZ corrosion resistant self priming pump is widely used in petroleum, chemical, pharmaceutical, smelting, food, film and television development, water treatment and other industries. It is the ideal product of environmental protection and the ideal equipment of civilization factory.Features of FPZ series corrosion resi...
flow rate: 2-80m3/h
head: 3-35m
pump material: PVDF,RPP
centrifugal pump: chemical pump
-
W horizontal single stage vortex water pump
W - type boiler feed pump, single - stage vortex pumpW-type single-stage vortex pump is a kind of pump belonging to the vortex pump. It is used for for the suction and delivery of water or other liquids with physical and chemical properties similar to water. Liquid temperature does not exceed 60 DegC.W-type single-stage vortex pump is often used for supporting boiler water supply and is widely used in shipbuilding, textile, chemical industry, metallurgy, machinery manufacturing, aquaculture, fixed fire regulator, heat exchange unit, agricult...
flow rate: 0.5-15m3/h
head: 20-120m
pump material: cast iron or stainless steel
vortex pump: transfer pump
-
Vertical inline centrifugal pipeline pump
ISG pipeline pumps are used to transport clean water, free of solids and other similar liquids with physical and chemical properties to water.At the same time, according to the operated temperature, medium etc. Different ISG type pipeline centrifugal pumps are based on the different application of hot water, high temperature, corrosive chemical pumps, oil pumps.ISG pump has the same energy saving, low noise and stable performance. It adopts the excellent hydraulic model and the performance parameters of the IS single-stage centrifugal pump ...
flow rate: 3-1500m3/h
head: 3-125m
pump material: cast iron or stainless steel
centrifugal pump: chemical pump