Products List 15
-
GW sewage vertical pipeline inline not clogging pump
Pumped liquids (clean water and wastewater)GW vertical pipeline sewage pump is very convenient for installation.GW pipeline sewage vertical pump is widely used as general pipeline pump for high-rise buildings to pressurize and supply water, delivery water. GW sewage pump is also suitable to transport sewage/wastewater containing particles and fiber etc. impurities. As GW sewage vertical pipeline pump is equipped with single flow channel or double flow channel impeller, it can be used not only as drainage pump, filtration, washing condensing cir...
flow rate: 2-1500m3/h
head: 5-80m
pump material: cast iron, stainless steel
centrifugal pump: vertical pump
-
WQ Stainless steel sewage immersible pump
Handle liquidsQW(WQ) type non clogging submersible sewage pump is a new generation of pumps successfully developed on the base of foreign advanced technology and combining with characteristics of domestic water pumps. QW(WQ) non clogging submersible sewage pump has the unique effect in the discharge of wastewater with solid particles and long fiber etc. impurities. Impeller StructureQW/WQ wastewater pump adopts a unique impeller structure and a new mechanical seal, which can effectively transport the wastewater or waste liquids with solid...
flow rate: 3-800m3/h
head: 3-50m
pump material: stainless steel
centrifugal pump: submersible pump
-
Bronze impeller self priming oil pump
Self-priming performanceThe pump belongs to self-priming centrifugal pump with strong self-priming performance. Suction height:4 to 5m. Bottom valve is not needed in the pipeline. Before work, it is only necessary to ensure that some oil is restored into pump body.Material:Pump case: cast iron, bronze impeller, YB2 explosion proof motor, EXDIIBT4/F/IP55,hard alloy mechanical seal,Pumped liquids:Used in petroleum industry, land oil depot and oil tanker as Marine cargo oil pump, bilge pump, ballast system and machine cooling water cir...
flow rate: 3-800m3/h
head: 5-80m
pump material: cast iron case,bronze impeller,Ex-proof motor
centrifugal pump: self priming pump
-
S Stainless steel amphibious pump
S water-cooled stainless steel sea water pumpfeatures1. Water-cooled body design, comprehensive natural cooling, motor does not overheat.2. Closed impeller structure design, high efficiency, energy saving, no loading.3. S-1057,S-3057 pumps, with the function of low water level suction and drying, plug and play.4.1.1KW Above pumps type, remove the bottom of filter net and directly add flange type joint to connect water pipe - can be used for pumping.5. Connected with the check valve, it can be used as land type pump, specially pumping underground...
flow rate: 12-120m3/h
head: 9-40m
pump material: FC-200, SUS304, Bronze impeller
centrifugal pump: submersible pump
-
L Large discharge capacity seawater pump
L Large discharge capacity seawater pumpPump structure is solid, dry motor, double-group mechanical seal, excellent waterproof, impeller diversion device, smooth water flow, pump can be used for long-term operation with waterproof grade IP68.Light weight, easy to operate and easy to maintainCentrifugal type, axial flow, oblique flow impeller design, low head at large water volume, low energy consumption is in line with economic benefitsALBC3 aluminum bronze material, both seawater corrosion resistance and abrasion resistance, less sand wear.A...
flow rate: 120-420m3/h
head: 4-8m
pump material: stainless steel, bronze, cast iron
centrifugal pump: submersible pump
-
Sewage effluent water pump
WQ Sewage effluent water pump is used for discharge and delivery of silt, wastewater, dirty water and municipal sewage with solid and various long fibers (including corrosive and corrosive media). WQ sewage water pump is small in size, compact in structure and high in efficiency. It can automatically control the water level according to users' requirements. It can be equipped with automatic protection device, control cabinet and automatic installation system of double guide rail.WQ Sewage submersible pump is widely used in Municipal engineerin...
flow rate: 2-1500m3/h
head: 3-60m
pump material: cast iron or stainless steel
centrifugal pump: sewage pump
-
ZWL Self-priming close coupled sewage pump
ZWL series self-priming close coupled sewage pump is a simple installation of ZW shaft coupled self-priming sewage pump. Motor with long shaft is directly connected with impeller of pump without shaft coupling. So ZWL self-priming close coupled pump has compact structure, small volume, less vibration, good self-priming performance, strong sewage discharge capacity, high efficiency and energy saving etc. It is easy to use and maintain.ZWL Self-priming close coupled dirty water pump has the structure of axial back mixing type with gas-liquid...
flow rate: 3-800m3/h
head: 5-80m
pump material: cast iron, stainless steel
centrifugal pump: wastewater pump
-
Vertical inline circulating booster pump
TD Vertical inline circulating booster pump is equipped with standard electric motor and mechanical seal. The motor on the top can be pull-out for disassembly form. It is very convenient to repair the pump. It need not disassemble the pipeline system. The pumps use innovative detachable mechanical seal without disassembly of the motor.TD Vertical pipeline booster circulation pump is used to convey Clean, thin, non-corrosive, non-flammable and non-explosive liquids without any solid particles or fibers.Application:Heating system: heating cycl...
flow rate: 5-900m3/h
head: 10-50m
pump material: cast iron
centrifugal pump: transfer pump
-
HJ chemical process centrifugal transfer pump
HJ single-stage single suction cantilever chemical process centrifugal pump is developed on the base of IH chemical pump. The rated performance and installation dimension conform to the standard ISO2858. Pump material can be for cast iron, cast steel, 304, 304L, 316, 316L, CD-4MCU, 904, 904L, Hastelloy alloy, etc.HJ chemical process alkali pump is suitable to convey corrosive liquids such as lye, electrolyte, electroplating water, concentrated acid, bleaching liquid and urea etc. Impeller is for semi-open type. HJ chemical proces...
flow rate: 3-1200m3/h
head: 8-80m
pump material: cast iron, cast steel, stainless steel,alloy steel
centrifugal pump: transfer pump
-
TB synchronous self-priming pump
TB Single stage single suction horizontal synchronous self-priming pump is the best pump to replace submerged pump. It adopts good hydraulic model and is designed and manufactured according to ISO2858 standard. TB synchronous self-priming pump is widely used to transport all kinds of liquids.TB Synchronous self-priming pump is widely used in food, medicine, chemical, oil and other industries to transport water, chemical medium and all kinds of liquids.Max. working pressure:1.6MPALiquid temperature: -10 to 80DegC, 120DegC,Pump is hor...
flow rate: 2-400m3/h
head: 3-125m
pump material: cast iron, stainless steel
centrifugal pump: transfer pump
-
AY high temperature centrifugal oil pump
AY type high temperature centrifugal oil pump is divided into six structures: single-stage single-suction cantilever type, two-stage single-suction cantilever type, single-stage single-suction cantilever type, single-stage double-suction double-support type, two-stage single-suction double-support type and two-stage single-suction double-support type.AY type high temperature centrifugal oil pump is especially suitable for conveying high temperature and flammable, explosive or toxic liquid. The installation method is horizontal center line support. T...
flow rate: 2-600m3/h
head: 37 to 670m
pump material: cast iron, cast steel, alloy steel
centrifugal pump: chemical pump
-
QJD Stainless steel multistage deep well submersible pump
QJ,QJD series stainless steel multistage deep well submersible pumps are composed of motors and multistage impellers. The pumps are composed of impellers, guide blades, pump bodies, inlet and outlet joints, as well as pump shafts, axle sleeves and guide bearings. The motor adopts double end face mechanical seal, and the seal ring is "O" rubber for static seal.Pump shell adopts 201 seamless stainless-steel tube, 100% copper motor, high polymer plastic impeller and has the advantages of simple structure, high efficiency, low noise, safe and reliab...
flow rate: 1-20m3/h
head: 40-280m
pump material: stainless steel
centrifugal pump: submersible pump
-
ZS Stainless steel single stage pump
ZS type stainless steel horizontal single-stage centrifugal pump is made of stainless-steel plate stamping and expansion welding and other advanced technology. It can replace the traditional IS centrifugal pump and has beautiful appearance, light structure, high efficiency, energy saving, durability, light corrosion resistance and low noise. ZS pump is used to convey Clean, thin, non-flammable and explosive liquids without solid particles or fibers.ApplicationZS type stainless steel horizontal single-stage centrifugal pump is a wide range of m...
flow rate: 2-100m3/h
head: 3-50m
pump material: stainless steel
centrifugal pump: chemical pump
-
IMC Stainless steel magnetic chemical process pump
IMC stainless steel magnetic chemical process pumpIMC magnetic chemical process pump is for single-stage single-suction cantilever no leakage pump. The pump is designed at the base of IH single stage chemical centrifugal pump according to ISO2858. The flow parts are made of SS304, SS316, SS316L, titanium etc. The pump and motor are connected by shaft coupling. The pump is for back pull out structure. When repair pump, it need not disassembly pipeline or motor. Only disassembly shaft coupling and then disassembly the rotor part...
flow rate: 1-400m3/h
head: 3-125m
pump material: stainless steel, SS304,SS316,SS316L
centrifugal pump: chemical pump
-
ZJQ Submersible slag slurry pump
ZJQ submersible slag slurry pump is suitable for conveying slurry containing sand, cinder, tailings and other abrasive particles. ZJQ submersible sand pump is mainly used in metallurgy, mining, electric power, chemical industry, environmental protection, river dredging, sand pumping, municipal engineering and other industries.ZJQ submersible slag slurry pump is easy to install and move, high slag extraction efficiency, and can operate safely under harsh working conditions for a long time. It is an ideal pump to replace the traditional vertica...
flow rate: 5-2000m3/h
head: 15-95m
pump material: high chrome alloy
centrifugal pump: submersible pump
-
FB AFB Stainless steel chemical industry pump
FB stainless steel end suction cantilever chemical pumpAFB, FB pump is a single stage single suction cantilever type corrosion resistant centrifugal pump. AFB, FB chemical pump adopts advanced hydraulic model, novel structure and high strength combined double end mechanical seal, with high energy efficiency, compact structure, stable performance, reliable use and other advantages.AFB, FB stainless steel chemical pump is suitable for conveying corrosive liquid. The temperature of the medium to be transported is -20℃ to 105℃. The doubl...
flow rate: 2-400m3/h
head: 3-80m
pump material: stainless steel
centrifugal pump: chemical pump
-
IR single stage hot water circulating pump
IR type single-stage hot water circulating pump is a single-stage centrifugal pump. It is mainly used to transport hot water and suitable for boiler hot water circulating, urban water supply etc.Transported liquids do not contain solid particles and are similar to clean water. The inlet pressure of the water pump shall not exceed 0.6mpa, and the temperature of the medium to be conveyed shall be less than 120°. If the temperature of the medium to be conveyed exceeds 120° and is less than 200°, Our R type hot water circulating pump can be used.I...
flow rate: 6-400m3/h
head: 5-80m
pump material: cast iron
centrifugal pump: transfer pump
-
R hot water circulation pump
R type hot water circulating pump is a single-stage single-suction and two-stage single-suction cantilever centrifugal pump. R hot water circulation pump is suitable for metallurgy, power station, chemical industry and other departments to convey high pressure hot water without solid particles below 250℃. The temperature of hot water is below 250℃ and the inlet pressure of the pump is less than 3MPa.R type hot water circulation pump is mainly composed of pump body, impeller, shaft, cooling chamber, pump body support, suspension frame, sealing par...
flow rate: 14-416m3/h
head: 34-80m
pump material: cast iron, cast steel, stainless steel
centrifugal pump: transfer pump
-
QYB gas liquid mixing pump
QYB type gas-liquid mixing pump is a series of products of self-priming gas-liquid mixing pump with horizontal installation. QYB adopts the form of standard click coupling connection. The flow parts of the pump are all made of stainless steel.The suction port of the gas-liquid mixing pump can take advantage of the negative pressure action to inhale gas, so there is no need to use a gas compressor and an atmospheric injector. The high-speed rotating pump impeller stirs the liquid and gas, so no agitator or mixer is needed. As a result of pressur...
flow rate: 2-100m3/h
head: 10-173m3/h
pump material: stainless steel
vortex pump: centrifugal pump
-
RT gear dosing booster hot melt glue pump
RT Gear dosing hot melt glue pump is suitable for conveying the liquid with high viscosity without granular impurities .It has the characteristics of high output pressure, high viscosity of conveying medium, high operating temperature, vacuum input port, easy adjustment of rotating speed and large flow range etc. The material of the pump is wear-resistant to temperature and corrosion, with sufficient strength and dimensional stability.Application scope of hot melt glue pump:1. It is used in the polymerization reaction process to transport the melt...
flow rate: 2-100m3/h
head: 0.2-8MPA
pump material: Tool steel
gear pump: dosing pump