Products List 11
-
WQ Sewage submersible wastewater treatment pump
Sewage submersible pumpQW submersible sewage pump is made of cast iron or stainless steel. The pump is equipped with wide flow channel impeller (single flow channel or double flow channel) and volute case to convey the wastewater/sewage with big solid particle or long fiber etc. impurity. StructureQW(WQ) submersible non-clog sewage pump is composed of motor and pump, separated by oil isolation chamber and mechanical seal assembly. It is a mechatronics wastewater treatment pump. Motor and pump use the same shaft (rotor), the whole pump is shor...
flow rate: 2-1500m3/h
head: 3-60m
pump material: cast iron or stainless steel
drainage pump: sewage pump
-
Immmersible vertical multistage centrifugal pump for machine coolant
Immersible vertical multistage centrifugal pump for machine coolantCDLK/CDLKF is a self-priming vertical multistage centrifugal pump mounted with standard motor. The motor shaft is directly connected to the pump shaft through a coupling on the pump head. The pump can be equipped with intelligent protector according to needs to effectively protect dry rotation, phase loss and overload of the pump. To meet the installation depth of the tank or container, a cavity can be installed to change the length of the pump itself.Range of applicationCD...
flow rate: 2-20m3/h
head: 9-200m
pump material: stainless steel
centrifugal pump: submersible pump
-
Liquid Anhydrous Ammonia Transfer pump
Liquid Anhydrous Ammonia Transfer pumpYAB type liquid ammonia pump is based on the analysis of similar foreign products and the newly developed pump. It is mainly used for conveying liquid ammonia, ammonia, methanol, dimethyl ammonium, propylene oxide, crude benzene, ethylene oxide, chloride methane, isobutylene and butadiene properties similar volatile liquid. So the pump is widely used in gas, petroleum, chemical, pharmaceutical, metallurgy and other fields.The pump seal and vane adopts special formula abroad, abrasion resistance and toughnes...
flow rate: 5-50m3/h
Pressure: 2.5MPA
pump material: cast iron
transfer pump: vane pump
-
GW non-clogging pipeline pump
GW non clogging pipeline pump Not clogged impeller (Single flow channel or double flow channel)GW non-clogging pipeline pump adopts unique impeller structure and new mechanical seal, which can effectively transport wastewater with solids and long fibers. The impeller adopts single flow channel or double flow channel which is similar to a bend pipe with the same cross section size. Equipped with a reasonable volute chamber, the pump can convey the sewage or wastewater with solid particles or fiber etc. impurities. The pump has no vibration in ope...
flow rate: 2-1500m3/h
head: 5-80m
pump material: stainless steel,cast iron
centrifugal pump: sewage pump
-
CDL Stainless steel vertical multistage centrifugal pump
Stainless steel Vertical multistage centrifugal pumpThe pump is for non-self-priming multistage centrifugal pump with Standard vertical motor and quick mount mechanical seal. It is used to transfer water or other industrial fluids with different flow rate, pressure and working temperature. The flow parts of pump are made of stainless steel SUS304 and replace CR,CRN centrifugal circulating pump. Pumped fluids1.Thin, clean, non-flammable and explosive liquid without solid particles or fibers.2, the pump can transport such as mineral water,...
flow rate: 1-150m3/h
head: 8-250m
pump material: stainless steel
centrifugal pump: multistage pump
-
Single suction horizontal multistage boiler feed water pump
Single suction Horizontal Multistage boiler feed water pumpBoiler feed water with low middle pressure and hot water pumpDG horizontal multistage boiler feeding water pump is a multi-stage centrifugal pump for conveying clean water or other liquid similar to clean water in physical and chemical properties. It is suitable for feed water pump of medium and low-pressure boilers or secondary high-pressure boilers, as well as high pressure water supply and drainage in factories or cities. The temperature of conveying medium is -20DegC to 105°C, and...
flow rate: 6-450m3/h
head: 20-900m
pump material: cast iron, cast steel, stainless steel
centrifugal pump: multistage pump
-
fluoroplastic-lined anticorrosive centrifugal pump
Fluoroplastic-lined anticorrosive centrifugal pumpSingle stage single suction fluoroplastic alloy chemical centrifugal ump is manufactured according to ISO2858 international standard.Pump case/shell is made of metal lined with fluoroplastic (F46/FEP/PVDF). Impeller and pump cover is made of fluoroplastic (F46/FEP/PVDF) inserted with metal. Dynamic seal is for external installation Teflon bellows mechanical seal.The pump has the advantages of corrosion resistance, wear resistance, high temperature resistance, no aging, high mecha...
flow rate: 3-400m3/h
head: 5-110m
pump material: fluorine plastic FEP/F46
centrifugal pump: chemical pump
-
Stainless steel immersible sewage pump
YWP Stainless steel immersible sewage pumpYWP stainless steel submerged sewage pump has the vertical submersible structure. When pump works, the pump body is immersed in water and the subaqueous depth can reach 0.5 ~ 5m. In addition, it adopts a unique single-blade or double-blade impeller structure, which can effectively pass through fiber material with 5 times of the pump diameter and solid particles with pump diameter of 50%.The products comply with JB/T6525-92 technical Conditions of Centrifugal sewage Pump. YWP stainless steel sub...
flow rate: 2-1500m3/h
head: 3-50m
pump material: SS304,SS316,SS316L
centrifugal pump: sewage pump
-
vertical stainless steel pipeline sewage pump
Vertical Stainless-steel pipeline sewage pumpStainless steel pipeline sewage pump can be used for corrosive wastewater/sewage and clean water discharge. Pump is made of stainless-steel material and especially is used to drainage of sewage or wastewater with particles or fiber etc. impurities. Impeller is with single flow channel or double flow channel so that the wastewater or sewage with solid particles or fiber etc. impurities can be discharged smoothly. Stainless steel pump material has the good corrosion remittances. Pump inlet and outlet are ...
flow rate: 2-1500m3/h
head: 5-80m
pump material: SS304,SS316,SS316L
centrifugal pump: sewage pump
-
FH stainless steel chemical pump
FH stainless steel chemical pumpFH stainless steel series chemical pumps, which are widely used in chemical, petroleum, metallurgy, light industry, synthetic fiber, environmental protection, food, medicine and other departments. The chemical pump has the advantages of stable and reliable performance, good sealing performance, beautiful shape, convenient maintenance and so on. It is made of 316L and 304 stainless steel and can be customized.FH series stainless steel chemical pump is horizontal, single stage, single suction centrifugal pump. Stai...
flow rate: 2-400m3/h
head: 15-80m
pump material: SS304,SS316,SS316L
centrifugal pump: chemical pump
-
filter press feeding pump
Filter press feeding pumpNo leakage filter press feeding pump (side suction type with negative pressure device)The rated performance point and size of filter press feeding pump meet with ISO2858-1975 (e) international standard. It can be used to replace the enamel pump, ceramic pump, rubber liner pump, fluorine alloy pump, F-type corrosion resistant pump, IH chemical centrifugal pump etc. Pumps.Filter press feed pump is used to convey corrosive liquids or slurry with particles in the filter press process. The liquid temperature range: -10℃ ...
flow rate: 5-200m3/h
head: 10-80m
pump material: stainless steel, fluoroplastic, alloy steel, duplex stainless steel
slurry pump: chemical pump
-
Horizontal fiberglass FRP centrifugal pump
Fiberglass FRP centrifugal pumpThe flow components are made of polyvinyl butadiene (PVA) and modified phenolic fiberglass by high temperature molding, which have good corrosion resistance, high temperature resistance, light weight, high specific strength and no deformation, etc. The shaft seal adopts the common type and the granular-resisting type machine seal with reasonable structure and less power consumption. Application:FS horizontal fiberglass centrifugal pump is mainly used in petrochemical, smelting, dye, printing and dyeing, pestici...
flow rate: 1-100m3/h
head: 3-50m
pump material: fiberglass reinforced plastic FRP
centrifugal pump: chemical pump
-
ZXP Stainless steel self-priming pump
ZXP stainless steel corrosion resistant self-priming centrifugal pumpPump body and flow components of ZXP stainless steel self-priming pump are all made of 304 stainless steel or 316 stainless steel or higher standard stainless-steel material. Therefore, this pump not only has the self-priming performance without installing the bottom valve but also has the characteristics of acid resistance, alkali resistance and strong corrosion resistance. ZXP self-priming pump is widely applicable in chemical industry, energy and other enterprises with hig...
flow rate: 3-600m3/h
head: 20-80m
pump material: SS304,SS316,SS316L
centrifugal pump: chemical pump
-
WQP Stainless steel wastewater sewage submersible pump
Stainless steel wastewater immersible pumpWQP stainless steel wastewater sewage submersible pump has the advantages of remarkable energy-saving effect, anti-winding, anticorrosion, non-blocking, automatic installation and automatic control etc. It has a unique effect in discharging the wastewater or sewage with solid particles and long fiber etc. impurities. The whole shell is made of stainless steel with precision casting, which is specially designed to extract sewage and wastewater with slight acid and weak alkali.WQP stainless steel submersib...
flow rate: 2-2600m3/h
head: 3-50m
pump material: stainless steel
Sewage pump: wastewater pump
-
FYU UHMWPE submerged pump
FYU UHMWPE submerged pumpThe flow components are all made of ultra-high molecular weight polyethylene (UHMWPE) integral molding. The advantages of the material: excellent wear resistance, impact resistance, creep resistance, and excellent corrosion resistance. The pump is suitable for conveying the acidic and alkaline slurry or clean liquid in the low tank within the range of -20℃~90℃FYU corrosion resistant submerged pump is widely used in chemical industry, petroleum, machinery, sewage engineering, metallurgy, environmental protec...
flow rate: 2-400m3/h
head: 3-50m
pump material: UHMWPE
centrifugal pump: chemical pump
-
LW Sewage vertical pump
Sewage vertical PumpLW sewage pump is a kind of impurity pump. LW sewage pump has the single or double blades of impeller. So, the flow channel is wide and easy to transport sewage with fiber or other suspended impurities. In addition, there are inspection and cleaning holes on the shell of the pump body, so as to remove the dirty impurities inside the pump shell after the shutdown. features:Energy saving: The power curve is flat, which can run in the full performance range without overload.No clogging, good anti-winding performance, single b...
flow rate: 2-2600m3/h
head: 5-80m
pump material: cast iron or stainless steel
centrifugal pump: sewage pump
-
UHMW-PE mortar pump
UHMW-PE Mortar pumpAnti-corrosion and wear-resisting mortar pump adopts semi-open impeller. It belongs to single-stage single-suction cantilever centrifugal pump. All the flow components are made of ultra-high molecular weight polyethylene lining. The pump is Suitable for liquid extraction and slurry transport. Main parametersFlow range: 3m /h-2600m /hLift head range: 5m-70mPower range: 0.75kw-300kwSuitable medium: acid, alkali, salt, organic solvent with moderate concentration (Concentration below 80% sulfuric acid, less than 50% nitr...
flow rate: 2-2600m3/h
head: 5-70m
pump material: UHMW-PE
centrifugal pump: chemical pump
-
FSB Fluorine plastic unloading acid pump
FSB fluorine plastic centrifugal pump iPump body adopts metal shell lining FEP (F46) and pump cover, impeller and shaft sleeve are fluorine plastic with metal insert outsourcing whole sintering pressure molding, shaft seal mounted outside using bellows mechanical seal, static ring choose 99% alumina ceramic or silicon nitride, ring with four fluorine filling materials, corrosion resistant.FSB fluorine plastic centrifugal pump is widely used in automobile manufacturing pickling, painting process, Electrolyte transfer in non-ferrous metal sme...
flow rate: 1-100m3/h
head: 8-35M
pump material: fluorine plastic FEP/F46
centrifugal pump: chemical pump
-
ZA,ZAO petrochemical process pump
Petrochemical process pumpZA series pump for horizontal, axial suction, single - stage single - suction centrifugal pump. The pumps can transport all kinds of clean liquids, low temperature and high temperature liquids containing particles and the flammable, explosive, corrosive liquids. ZA pump is mainly used in oil refinery, petrochemical industry, power plant, general industrial process, offshore industry, etc.The packing box has cooling or heating pipe joints. Shaft seal can be for packing seal, also can be single or double end mechanical sea...
flow rate: 2-2600m3/h
head: 5-125m
pump material: cast steel, stainless steel, duplex stainless steel,alloy steel
centrifugal pump: chemical pump
-
LG Vertical multistage feeding water pump
Vertical multistage centrifugal feeding water pump for high-rise buildingLG series vertical, single suction, multistage disassembly type centrifugal pump meets the standard JB/T2727-93 of Vertical Multistage single suction Centrifugal pump Type and Basic Parameters. Its suction and discharge outlet are located on the inlet and outlet sections respectively. The rotor parts are composed of shaft, impeller, impeller spacer sleeve, shaft sleeve and other parts. The inlet section, middle section and outlet section are connected with tensioning ...
flow rate: 3-50m3/h
head: 20-120m
pump material: cast iron
centrifugal pump: multistage pump